f CREATOR CORPORATION(CHINA) User's Manual of DIG series Full Digital conference system V1.
Meaning of the Symbols ■ Safety instructions For your safe and correct use of equipments, we use a lot of symbols on the equipments and in t he manuals, demonstrating the risk of body hurt or possible damage to property for the user or others. Indications and their meanings are as follow. Please make sure to correctly understand these instructions before reading the manual. This is A level product, which may cause radio interference in the living environment.
Important Notices ◆ Immediately remove all other things after the warning In order to ensure the reliable performance of the equipment and the safety of the user, please observe wiring installation.
Preface Full Digital conference system User's Manual mainly introduces the operation method of CR-DIG5201、 CR-DIG5200BK、CR-DIG5202A2、CR-DIG5204A2、CR-DIG5202B2、CR-DIG5204B2、CR-DIG5202E2、 CR-DIG5204E2、CR-DIG5202D2、CR-DIG5204D2、CR-DIG5202C1、CR-DIG5204C1、CR-DIG5202C2、 CR-DIG5204C2 、 CR-DIG5206CH 、 CR-DIG5207SP 、 CR-DIG5205DS 、 CR-DIG5205DS-S 、 CR-DIG52032BOX、CR-DIG5203E3、CR-DIG5200EXP、Their main performance parameters and common fault solutions.
Index Chapter 1, summary ................................................................................................................................. 1 Chapter 2, conference controller .............................................................................................................. 2 2.1 DIG5201 ....................................................................................................................................... 2 2.1.1 features ...........................................
4.4.2 panel description .......................................................................................................... 27 4.4.3 The technical parameters ............................................................................................ 28 4.5 CR-DIG5202/4D2 speech unit ................................................................................................... 28 4.5.1 features ...........................................................................................
6.2 CR-P4 microphone headset with earmuffs ................................................................................ 45 6.2.1 functions Descriptions .................................................................................................. 45 6.2.2 The technical parameters ............................................................................................ 45 6.3 CR-M4KL415 Knob 415mm microphone rod............................................................................. 45 6.
User's Manual of DIG series Full Digital conference system 1 Chapter 1 Summary The CREATOR Full digital conference system, is another high-tech professional product series following multimedia control products and audio and video matrix products, including systems of discussions and statements, simultaneous interpretation, infrared voice allocation, remote conference call, the vote, the electronic table card, camera tracking, etc.
User's Manual of DIG series Full Digital conference system Chapter 2 2 conference controller 2.
User's Manual of DIG series Full Digital conference system Step three, fix it with a screw. As below: 2.1.3 panel description CR-DIG5201 front panel: CR-DIG5201 rear panel the rear panel: CREATOR CHINA 2012-05 WWW.CREATOR1997.
User's Manual of DIG series Full Digital conference system 4 ACTIVE MICRO’S——Maximum speech ①The host power switch ② POWER - Host power indicator If system host is normally powered, this settings “ ACTIVE MICRO’S ” button has a " maximum speech" “Easy Setup” function,,press indicator lights up. thr “ACTIVE MICRO’S ” to enter" the maximum ③ The the LCD display speech "set interface, you can view the current status or re-set the maximum number of speakers.
User's Manual of DIG series Full Digital conference system emission. 5 ⑧ MICROPHONES——microphone output port 8-channel microphone put out alone.。 VOLUME——line out adjustment The VOLUME button has a "line out adjustment" "Easy Setup function usd to adjust ⑨ The ground column。 the line out and conference unit volume size.
User's Manual of DIG series Full Digital conference 6 system T568A linear order Signal 1 - 2 TXD sending data 3 RXD Receiving data 4 - 5 GND 6 - Null 7 - Null 8 - Null 9 - Null 2.1.4.
User's Manual of DIG series Full Digital conference system The menu steps can be summarized as:: Properly connected and powered setting option options Select information information 2.1.5.4 Select a Determine the setting the optional parameter Determine the parameter Go back and determine the set menu structure instructions Menu structure diagram: CREATOR CHINA 2012-05 WWW.CREATOR1997.
User's Manual of DIG series Full Digital conference system 8 自动通道 Automatic channel 关闭 Close 打开 Open 网络设置 Network settings IP 地址 IP address 系统信息 System Information 单元总数 the total number of units 话筒信息 Mic information 子网编码 Subnet coding 默认网关 Default Gateway 双机热备份 Dual Backup PC 状态 PC state 扩声设置 PA set 关闭 Close 打开 Open 音量设置 Volume setting 线入 Line into 高音 Treble 低音 Bass 线出 Line-out 红外 Infrared 音效设置 Sound settings 恢复默认 Restore the default 确定 Confirm 取消 Cancel 版本信息 Version Information 单元管理 Unit manageme
User's Manual of DIG series Full Digital conference system PC Status: display whether connect to PC 9 software 2.1.5.4.2 Volume Settings All speech units and translation units display as follows: Speech units display: Line in: Adjust the input volume of line In. Treble: Adjust the conference unit fidelity audio treble and line output treble. Bass: Adjust the conference unit fidelity audio Translation units display: bass and the bass of line output.
User's Manual of DIG series Full Digital conference 10 system number of representative units and translation It can set 1/2/4/6 representative units to be opened simultaniously, the corresponding number units. of the presidential spokesperson is 7/6/4/2. The entire system could activate utmost 8 microphones at the same time. 2.1.5.4.6 2.1.5.4.
User's Manual of DIG series Full Digital conference system open the power supply of the conference host, 11 select the "translation set", then the “translation room set ", then “start setting”, the display shows as follows: The "SELECT OUT" knob's function of setting the channel number of all translation units will be disabled. 2.1.5.4.
User's Manual of DIG series Full Digital conference system PA settings Settings" item, the direction 2.1.5.4.10 each press. The LCD 12 button light flashes by screen displays the corresponding menu setting interface. The selection is successful; Set the speaker switch for conference unit (excluding translation unit). "Open", open all the speakers. "Off", all the speakers are turned off. 2.1.6.4.
User's Manual of DIG series Full Digital conference system parameters setting; 6、 press the direction key“ ” , set parameter 001 for 13 "option 3". The button light flashes for each click, the LCD will display correspondingly; 12、the IP address setup is completed, press "ENTER" 7、the setting of "Option 3" is completed. Press "NETER" button to confirm, and then press the return key "MENU" to return to previous menu; key to confirm the settings.
User's Manual of DIG series Full Digital conference system 2.1.7 System connection diagram 摄像跟踪主机 Camera tracking host 翻译单元 translation unit 电话耦合器 Telephone coupler 系统主机 The system host 电脑 3 full digital conference system host CR-DIG5201 to form a double hot backup mode, which can ensure that when system is running, any of a host fail, the system can normally run, the meeting will not be interrupted, the speaking and voting function can be continued. 2.2.
User's Manual of DIG series Full Digital conference ◆system automatically save translation status, ensuring simultaneous interpretation and continuous speaking Allows you to manually switch the host into backup host and backup host into host, and vote meeting, attendance will not be interrupted; ◆ PC software failure, backup PC software to save data and continue to work to ensure normal range of services; ◆ being breaked away from PC software, you can still double hot backup, to ensure data is not lost;
User's Manual of DIG series Full Digital conference system 7 ① POWER - Power signal indicator MASTER - indicator flashing, suggests that meeting unit interface of full digital conference system host CR-DIG5201 to form a double hot backup host is in host mode, responsible for system work. SLAVE - lights flashing, means that backup backup mode. host is in backup mode, backup data.
User's Manual of DIG series Full Digital conference system output。 POWER INPUT——sysyem power input port The sysyem power input is 110V/220V AC。 2.2.3 technical parameters Parameter CR-DIG5200BK Power Supply 110V/220V AC Frequency 20-20KHZ Response Signal-to-noise ratio (S/N) >80dB Channel Crosstalk >80dB Total <0.05% harmonic distortion Maximum output 350W power Static power 12W Dimensions 430L x 260W x88H (mm) Color dark gray CREATOR CHINA 2012-05 WWW.CREATOR1997.
User's Manual of DIG series Full Digital conference system 2.2.4 System connection diagram 系统主机 The system host 备份主机 The backup host 摄像跟踪主机 Camera tracking host 电脑 Computer 音响 Audio 交换机 Switch 翻译单元 Translation unit 连接盒 Connection box 代表单元 Delegate unit 主席单元 Chairman unit CREATOR CHINA 2012-05 WWW.CREATOR1997.
User's Manual of DIG series Full Digital conference system 15 Chapter 3 Conference system translation unit The CR-DIG5203E3 translation unit is a fully functional translation unit, which can carry 15 +1 languages simultaneously, and realize the direct translation and indirect translation of these 3.2 panel description Front View: languages. 3.
User's Manual of DIG series Full Digital conference system Services: output channel, long press a or b for 3 seconds, 17 the button becomes the shortcut key, you can In the conference mode, press the number quickly select output channel. LCD display - Resolution 320X64, the left shows the input channel number and multilingual keyCALL" button to enter the service menu, which can offer language switch, intercom, tea applications and viewing the short message information.
User's Manual of DIG series Full Digital conference system Press "EXit" button to finish the call and quit, loads Headphone volume 3.5 technical parameters Parameter CR-DIG5203E3 Power Supply 18 10mW The host power or DC24V input Display Control Display 320X64lattice (blue white) Frequency Response 20~20KHZ Unit interface 8 core aerial head 290LX128WX86.6H Signal-to-noise >80dB Dimensions (mm) Color dark gray ratio (S/N) Channel >80dB Crosstalk Total harmonic <0.05% distortion Power 1.
User's Manual of DIG series Full Digital conference system 3.6 System connection diagram 翻译单元 translation unit 电话耦合器 Telephone coupler 系统主机 The system host 电脑 Computer 音响 Audio 连接盒 Connection box 代表单元 Delegate unit 主席单元 Chairman unit CREATOR CHINA 2012-05 WWW.CREATOR1997.
User's Manual of DIG series Full Digital conference system 20 Chapter 4 Conference system speech unit CREATOR full digital conference speech unit is a 16-channel cable simultaneous discussion unit with desktop and embedded options, set channel number, has built-in speaker and headphone jack. Other features like clear sound, volume size adjustable, DSP processing speak, vote, key sign functions into one. Users can manually select to listen to any channel with simple operation.
User's Manual of DIG series Full Digital conference system Touch type speaking and voting unit: CR-DIG5202E2chairman speech unit CR-DIG5204E2delegate speech unit 21 Desktop No speaker Speak Vote No channel selection 160*20LCD interface No name displayer Touch key Appearance Name and Model Simple type speaking and voting unit: CR-DIG5202D2chairman speech unit Product Features Desktop No speaker Speak Vote CR-DIG5204D2delegate speech unit No channel selection 160*20LCD interface No name displayer Embe
User's Manual of DIG series Full Digital conference system 22 can be combine with any embedded unit of the series all digital conference system Embedded unit CR-DIG5206CH channel selection Embedded installation No speaker,No Speak,No vote,No Name displayer, No LCD user interface Channel selection unit Touch buttons can be combine with any embedded unit of the series full digital conference system Appearance Name and Model Product Features Embedded unit Embedded installation CR-DIG5207SP 扬声器单元 Sp
User's Manual of DIG series Full Digital conference system the alphabet, Russian and Japanese languages intercom and other services; in the maximum; ◆ Support Chinese and English. ◆ support all electronic nameplates of the entire system scroll off display synchronically; ◆ resolve uncommon word display problems of 4.2.
User's Manual of DIG series Full Digital conference ②system headphone jack. >80dB Signal-to-noise ③ The LCD screen (320 * 64). Support 8 ratio (S/N) Chinese characters and 16 English letters in the maximum. ④ IC card slot. Headphone output ⑤ The 320x64 LCD display, can display operating information. ⑥ flat-panel microphone Headphone loads Headphone ⑦ vent. Do not place hands on top of it when you volume are speaking.
User's Manual of DIG series Full Digital conference system Support PC software or insert IC card electronic nameplate display; ◆ high bandwidth to transmit information, the PC software can complete about 1000 unit electronic nameplate display content delivery in one second; ◆ Built-in high sensitivity microphone; CR-DIG5202/4B2side view: ◆ support contactless IC card sign and automatically obtain representation; ◆ support 15 +1 simultaneous interpretation; ◆ supports three vote ways: A) vote: in favo
User's Manual of DIG series Full Digital conference system 26 ⑦ microphone interface. ⑧ channel selection display (00-15). ⑨ speaker. ⑩ multifunctional vote button - Meeting voting, numbers 2,3,4, respectively stands for in favor of, waiver, opposed. - The Conference election, numbers 1-5 keys on behalf of different candidates. - Conference rating, numbers 1-5 keys represent levels of, -, -, 0, +, + +. CR-DIG5204B2front view: Channel selection buttons.
User's Manual of DIG series Full Digital conference system Input 2.2K 27 impedance ◆ supports three vote ways: Speaker 2W Headphone output A) method of voting: agree / abstain / against; B) the manner of election / survey method: 1/2/3/4/5; >8Ω C) responds / Review Mode: --/-/0 / + / + +.
User's Manual of DIG series Full Digital conference system ⑤ headphone jack. 28 ⑥ volume knob. 4.4.3 technical parameters Parameter CR-DIG5202/04E2 Power Supply The host power Frequency 20~20KHZ Response CR-DIG5202/04E2side view: Signal-to-noise ratio (S/N) >80dB Channel Crosstalk >80dB Power consumption 1.5W Display Control 160X20lattice (blue white) Display Unit interface 8 core aerial head Dimensions (mm) 71.7LX41.6WX15.7H Color dark grey 4.
User's Manual of DIG series Full Digital conference 29 ◆system supports three vote ways: Press the chairman unit microphone key for three A) method of voting: agree / abstain / against; seconds, close all opened delegate speech unit. B) the manner of election / survey method: 1/2/3/4/5; C) responds / Review Mode: --/-/0 / + / + +. ④ multifunctional vote button ◆ microphone, with two-tone prompts circle; stands for in favor of, waiver, opposed.
User's Manual of DIG series Full Digital conference 30 system modified language of unit machine; Headphone loads ◆ when embedded channel selection units are used, the number is unlimited; Headphone volume ◆ capacitive touch buttons, no mechanical Display Control 160X20lattice (blue white) key sound, longer life, waterproof design; Display Unit interface 8 core aerial head Dimensions (mm) 189.5LX93WX42.
User's Manual of DIG series Full Digital conference system 31 CR-DIG5202/4C2: CR-DIG5202/4C2 appearance size chart: Combine CR-DIG5206CH with CR-DIG5202/4C2 4.6.3 Installation instructions All digital conference system embedded units adopt desktop installation, directly open the desktop according to embedded units’ size. Connect the signal lines and power lines to the host, then fix the embedded units on the desktop with the supplied screws, nuts, mounting bracket and wing The combination nut.
User's Manual of DIG series Full Digital conference system The combination of 32 CR-DIG5207SPand CR-DIG5202/4C2; The combination of CR-DIG5206CH, CR-DIG5202/4C1 and CR-DIG5207SP Installation steps: 1, open the desktop corresponding to the size; 2 install the embedded digital conference machine into the opened square hole of desktop; 3, install the fixing plate on pressure riveting screw under the machine; 4, fix the fixing plate with butterfly nut; 5, making M5X35 the butterfly screws go through the
User's Manual of DIG series Full Digital conference system 33 ① headphone jack. ② channel selection display (00-15). ③ Channel Select button. ④ microphone interface. ⑤ microphone switch, Chairman priority switch. Press the Chairman unit priority button for 3 4.6.4 panel description CR-DIG5206CH CR-DIG5202/4C1 seconds, close all opened delegate speech units. ⑥ speaker. ⑦ LCD display can display operating information.
User's Manual of DIG series Full Digital conference system Frequency 20~20KHZ (mm) Response Signal-to-noise Color dark 34 >80dB ratio (S/N) Parameter CR-DIG5206CH >80dB Power Supply The host power <0.05% Frequency Response 20~20KHZ Total harmonic Power 1.1W Signal-to-noise ratio (S/N) >80dB Channel Crosstalk >80dB Total harmonic <0.05% Power consumption 1.
User's Manual of DIG series Full Digital conference system speech unitCR-DIG5204A2 to delegate 320X64 display will prompt 35 illustrate the speech unit display screen the machine has signed in and the total number of signing. If clearly. Properly connect and start the system and conference unit, under the mode of the meeting, microphone indicator is still flashing, that suggests the sign is not successful. Press microphone button to continue the signing.
User's Manual of DIG series Full Digital conference 36 Ifsystem you choose "yes", the display shows: respectively stand for the level of -, -, 0, +, + +.
User's Manual of DIG series Full Digital conference system The system supports 8 microphones 37 simultaneous at the 3、 FREE mode maximum, the maximum number of speakers is 6, only two Allow six representatives to speak, no waiting for. microphones of chairman unit can be opened at the same time. 4、 APPLY mode Representative unit should get the approval from Chairman or operator before speak. Without approval, microphone pole indicator is green. 4.7.3.6 4.7.3.
User's Manual of DIG series Full Digital conference system Press "2" key to apply internal call. Unit machine display 38 appears below interface: Press "Cancel" button to cancel the sent If plug in your headphones, select operator, the interface of applying to operator prompts: request. Press "Back" button to return to top menu.
User's Manual of DIG series Full Digital conference system identity display. 4.8 VFD display unit ◆ CR-DIG5205DS CR-DIG5205DS、CR-DIG5205DS-S display unit provides functions like electronic nameplate, 39 is the enhanced version which can display names and positions, short message, tea applications, and front identity. tea applications, message display, and so on. 4.8.
User's Manual of DIG series Full Digital conference 40 system ◆ can import / export names, positions, 4.8.3 technical parameters numbers edited in Excel format. seat Parameter CR-DIG5205DS CR-DIG5205DS-S Power Supply The host power Power consumption 6W operating instructions 320X64lattice (blue white) 256X64 点阵(红底白字) Install the "Electronic table card display 4.9.2 Display Control Display Card tables Display Unit interface 8 core aerial head Dimensionmm 233.
User's Manual of DIG series Full Digital conference system Venue management, preferable. Name: an For the convenience easy-to-remember name of 41 newly created venue: is IP address: in a network, IP addresses cannot overlap. Card tables Display: three options available: scroll off display, name only display, post only display. Tea application: the setting of discuss unit's tea application switch.
User's Manual of DIG series Full Digital conference 42 system Enter in the ID numbers of discuss units to open / close.Then select open / close. In venue personnel management, right-click the “personnel name”, personnel management dialog will pop-up, such as: Directly enter the desired ID number, name, position. Delete venue: To delete the entire venue content. Modify venue: to amend venue parameters, such as venue name, IP address, card tables, tea applications. Delete staff: To delete the current staff.
User's Manual of DIG series Full Digital conference system 43 Request processing is complete, right click the requester and choose "processed request" button. 4.9.2.3 short message sending The software provides short message sending service, choose the staff required to send in venue management list, enter message content, and then press "Send Message" button. The messages can be sent individually or collectively. 4.
User's Manual of DIG series Full Digital conference system 系统主机 The system host 电脑 Computer 音响 Audio 连接盒 Connection box 代表单元 Delegate unit 主席单元 Chairman unit 通道选择单元 channel selection unit 嵌入式组合单元 Embedded composite unit Connection diagram b CREATOR CHINA 2012-05 WWW.CREATOR1997.
User's Manual of DIG series Full Digital conference system 45 翻译单元 translation unit 电话耦合器 Telephone coupler 系统主机 The system host 电脑 Computer 音响 Audio 连接盒 Connection box 显示单元 display unit Chapter 5 Conference system connection box CREATOR Conference units. 5.1 system connection box 5.1.
User's Manual of DIG series Full Digital conference 42 nut knob connector, make the connect of the system device more stable; ◆ each digital interface to connect speech units; two ◆ "LINK" interface is connected to the upper digital interface or directly connected to Conference host and active expansion ① 2 meters connection box; upper digital interface box. ◆ connect to the next digital interface by ② connect to the next digital interface box. air routes. connect to host or the "NEXT" interface.
User's Manual of DIG series Full Digital conference systemconnection diagram 5.1.4 42 系统主机 The system host 电脑 Computer 音响 Audio 连接盒 Connection box 代表单元 Delegate unit 主席单元 Chairman unit 5.2 Active expand connection 5.2.1 ◆ with box features communication status indicator provide fault tips; Active expand connection box CR-DIG5200EXP of all digital conference system is a connection box to provide power and ◆ can be connected to 4-way unit, can provid 350W power at the maximum.
User's Manual of DIG series Full Digital conference 43 system 5.2.2 Descriptions of panel ④ POWER——the power indicator Indicator lights up when connection box is normally powered. functions Top view: 5.2.
User's Manual of DIG series Full Digital conference system 5.2.4 System connection diagram 43 连接盒 Connection box Chapter 6 Accessories 6.1.2 6.1 6.1.1 CR-P2 Earphone(no mic) Function description technical parameters technical parameters CR-P2 Unit interface 3.5mm mono connector ◆ can be used in simultaneous interpretation Frequency range 80Hz – 2KHz conference unit for monitoring; Sensitivity 90dB ◆ can be used in conferencing systems to avoid being influenced by others; ◆ comes with 1.
User's Manual of DIG series Full Digital conference ◆High-density 5-core air system 6.2 CR-P4 earmuffs with microphone headset 6.2.1 Function description ◆ light delicate shape makes users feel more comfortable; ◆ work with the translation unit of simultaneous interpretation system for listening and speaking; ◆ 45 interface. ◆Normal speech indicator; ◆Speech application indicator can be used in conferencing systems to 6.
User's Manual of DIG series Full Digital conference (8-core) system ◆ the CR-HL 020 20 meters air discuss unit line (8 core) ◆ the CR-HL 050 50 meters air discuss unit line (8 core) ◆ the CR-HL 100 100 meters air discuss unit line (8 core) Features ◆ the CR-HL * used to extend the connection between Conference host and expansion host or Conference speech units; ◆ with five optional specifications: 5 m, 10 m, 20 m, 50 m, 100 m ◆ 8-core cable, a male and a female connectors; ◆ transmission distance up to 1000
CREATOR CORPORATION(CHINA) Copyright by CREATOR Last Revision:05/2012