Specifications

A - 12
• Automatic refresh setting 3
Transmission range of each CPU CPU side device
CPU shared memory G Head device W100
CPU
Number of points Head End Head End
No. 1 machine
No. 2 machine
No. 3 machine
No. 4 machine
• Automatic refresh setting 4
Transmission range of each CPU CPU side device
CPU shared memory G Head device W100
CPU
Number of points Head End Head End
No. 1 machine
No. 2 machine
No. 3 machine
No. 4 machine
[Basic system settings]
Operation cycle setting Automatic setting
Operation mode M2000 turns ON when the switch changes
from STOP to RUN.
Emergency stop input setting PX0
• Latch range
Symbol Latch (1) head Latch (1) end Latch (2) head Latch (2) end
Internal relay M
Link relay B
Annunciator F
Data register D
Link register W
Latch (1): Range that can be cleared by Latch clear
Latch (2): Range that cannot be cleared by Latch clear
[PLC setting list]
Unit type Number of points Occupied I/O No. Base Slot No. I/O response time
Input 16 000-00F Main base 1 10ms
Output 16 010-01F Main base 2
(3) No. 1 machine QnHCPU PC parameter
1 Number of CPUs 2 units
Operation mode Error operation mode in the event of CPU stop
No. 1 machine All machines are stopped due to stop error.
2
No. 2 machine All machines are stopped due to stop error.
Out-of-group input setting The status is retrieved.3
Out-of-group output setting The status is not retrieved.
Refresh setting
Transmission range of each CPU CPU side
CPU shared memory G Head device M2400
Setting 1
CPU
Number
of points
Head End Head End
No. 1 machine 0 ---- ---- ---- ----
No. 2 machine 50 0800 0831 M2400 M3199
Transmission range of each CPU CPU side
CPU shared memory G Head device D0
Setting 2
CPU
Number
of points
Head End Head End
No. 1 machine 0 ---- ---- ---- ----
4
No. 2 machine 640 0832 0AB1 D0 D639
Use for applications
other than
positioning device
for monitor.