User manual

III
Chapter 3 DIALLING WITH V.25.Bis 3-1
Chapter 4 MODEM MESSAGES 4-1
Chapter 5 S-REGISTERS 5-1
S0 – Number of Ring Characters before Modem engages 5-2
S1 – Ring Character Counter 5-2
S2 – Esc Sequence Character 5-2
S3 – Carriage Return Character 5-2
S4 – Line Feed Character 5-2
S5 – Backspace Character 5-3
S6 – Waiting Time for Dialling Tone 5-3
S7 – Waiting for Carrier Signal 5-3
S8 – Pause Time after Comma 5-3
S9 – Answer Time after Carrier Recognition 5-3
S10 – Delay between Carrier Loss and Hanging Up 5-4
S12 – Guard Time for Esc Sequence 5-4
S14 – General Options 5-4
S16 – Modem Test Options 5-5
S18 – Test Timer 5-5
S19 – Autosync Register 5-6
S20 – HDLC Address/BSC Synchronous Character 5-6
S21 – V.24/General Options 5-6
S22 – Loudspeaker/Authorised Modem Messages 5-7
S23 – General Options 5-7
S24 – Current Saving Switch 5-8
S25 – DTR Delay Time 5-8
S26 – Delay RTS to CTS 5-8
S27 – General Options 5-8
S28 – General Options 5-9
S29 – Flash Dial Modifier Time 5-9
S30 – Inactivity Timer 5-9
S31 – General Options 5-10
S32 – XON Character 5-10
S33 – XOFF Character 5-10
S36 – Fallback on V.42 Connection Set-up 5-10