Model No.
Congratulations on purchasing the ZiiSound DSx Wireless Subwoofer, a perfect complement to the ZiiSound series of wireless speaker systems featuring SLAM (Symmetrically Loaded Acoustic Module) Technology. Experience a whole new definition of freedom in placement for that perfect acoustic projection with our wireless systems. Additional ZiiSound D5x, D3x or DSx shown here and throughout the user manual are for illustration purposes only. Sold separately. Not included.
EN For detailed product information, instructions or to find out more about our speakers, visit www.creative.com/speakers Safety Instruction Please read the following before using the Creative Products: • Use a mains plug that is appropriate for your country or region. • To be completely disconnected from the power input, the mains plug has to be disconnected /detached from the mains. • Disconnect the mains plug when the device is expected to be unused for several days.
Technical Specifications • Input Rating: 100-240V~ 50/60Hz 300mA • Operating Frequency : 5725 – 5850 MHz • Supported Speaker models : ZiiSound D5x , ZiiSound D3x • Operating Range: Up to 30 meters (Measured in open space. Walls and structures may affect range of device.) • Device Operating Temperature : 0ºC to 50ºC Note: Compliance markings are located at the back of this product. Compatibility Disclaimer • Every electronic device is subjected to radio frequency (RF) interference from external sources.
1 Product Overview / Connectivity Diagram 1 2 3 1 ZiiSound DSx LED Status Indicator LED lights up to indicate active wireless link status 2 SLAMTM Master driver Do not poke objects into these areas 3 SLAMTM Pressure drivers Do not poke objects into these areas 4
4 5 6 4 LINK Button For various actions to LINK and connect to ZiiSoundD5x or D3x 5 Bass Level Control To Increase or decrease the bass level 6 AC IN Attach supplied AC cord into AC IN, then into mains LED Status Subwoofer Status OFF Standby (Mains Powered ON, not connected to any speaker) LINK discoverable mode Rapid blinking LED LED blinks twice and goes off Restored to Factory default setting LED stays ON Linked to speaker 5
2 To Power ON the ZiiSound DSx Plug in the AC cord into the AC IN and switch on the mains. The ZiiSound DSx is powered ON and in standby mode.
3 To link up with the ZiiSound D5x or D3x To link to the ZiiSound D5x or D3x master speaker unit, the ZiiSound DSx needs to be in LINK Discoverable mode for the master speaker unit to establish a link to ZiiSound DSx. To activate LINK discoverable mode, follow the instructions below. Link discoverable mode Rapid blinking LED A With the Subwoofer mains powered ON, Press and hold the Link button for 4 seconds and release when the LED blinks once.
4 To de-link the ZiiSound DSx from any master speaker unit To de-link the ZiiSound DSx from any master speaker unit for linking to another master speaker unit, perform the following instructions below. Return to Factory default Two Led Flashes and Led stops blinking A With the Subwoofer is powered ON, press and hold the Link button for 10 Seconds until 2 flashes of LED is seen and the LED stops blinking. Subwoofer is cleared of memory and in standby mode.
5 Return to factory default setting / Clear Link system Follow these steps to return to factory setting to clear link system memory when a change in speaker configuration is required (For example, linking additional D5x or DSx) Action LED Status Press and hold the LINK button for 10 seconds when the subwoofer is powered ON Two Led Flashes and Led stops blinking Wireless subwoofer is cleared of link system memory and in standby mode.
I am having difficulty in linking up the ZiiSound DSx with the ZiiSound D5x or D3x.
DECLARATION OF CONFORMITY According to LVD Directive (2006/95/EC) and R&TTE Directive (1999/5/EC) Company Name : Creative Technology Ltd Company Address : 31, International Business Park Creative Resource Singapore 609921 Declare under our sole responsibility that the product(s): Product Name Model Number Intended Use Restrictive use : : : : ZiiSound DSx MF8125 Office and Home Usage Nil To which this declaration relates are in conformity with the following standard(s): Radio : EN 300 440-1 V1.6.
EN Hereby, Creative Technology Ltd. declares that this wireless subwoofer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. FR Par le présent document, Creative Technology Ltd. déclare que ce caisson de basses sans fil est conforme aux exigences essentielles et autres dispositions de la directive 1999/5/CE. DE Hiermit erklärt Creative Technology Ltd.
© 2011 Creative Technology Ltd. All rights reserved. Creative, the Creative logo, SLAM™, Zii and ZiiSound are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice. Use of this product is subject to a limited warranty. Actual contents may differ slightly from those pictured.
