User guide
Using WebCam Go as a Portable Camera 18
6. Continue holding the camera still until the Camera busy LED (red light) goes off.
The picture(s) is(are) taken and stored in the camera’s memory.
Note:
When the counter value reaches “000”, you cannot take any more pictures until you have
cleared the camera’s memory by deleting existing pictures.
7. To take another picture, repeat steps 4 through 6.
8. To switch off the camera, press the Off button and hold it down for 2 seconds.
'RZQORDGLQJ
3LFWXUHVIURP
:HE&DP*R
After taking pictures, reconnect the WebCam Go to the PC, and use the WebCam Go Control
application to download the pictures. WebCam Go Control displays the pictures stored in the
camera in thumbnail view and you can select those that you want and download them into your
computer.
&XVWRPL]LQJ
: HE&DP*R
Use WebCam Go Control to adjust the following camera settings for photo-taking:
❑ Image size
❑ Number of frames in multiple snapshots
❑ Time interval between successive frames for multiple snapshots
❑ Level of quality
❑ Beep mode enabled or disabled
❑ Duration of the delay for taking delayed snapshots
❑ Power-saving enabled or disabled
❑ Length of time before WebCam is switched off
7RVWDUWWKH+HOS
ILOHIRU:HE&DP
*R&RQWURO
1. Click the Creative logo at the top left corner of WebCam Go Control’s main window.
2. On the WebCam Go Control menu, click Help.
• The camera will turn itself off
automatically if it is left idle
after a specified amount of
time.
For more information on
downloading pictures and
customizing the camera, refer to
the Help file for WebCam Go
Control.