User guide
Installing WebCam Go 5
,QVWDOOLQJ
%DWWHULHVIRU
:HE&DP*R
When you disconnect the camera from the system and use it as a digital camera, it operates on
two 1.5 V ‘AAA’ alkaline batteries.
To insert or replace batteries
1. Press the Off button to switch off the
camera.
2. Flip the camera’s head unit upwards.
3. Hold the camera in one hand and press the
bottom area of the battery cover with one
thumb until the catches on the cover are
detached from the grooves.
4. Push the cover upwards.
5. Lift the cover and put it aside.
6. Remove the old batteries (if any).
7. Insert the new batteries according to the directions shown in the battery compartment.
8. Align the catches on the cover with the respective grooves in the casing and slide the cover
until it snaps back into place.
• Batteries that are specifically
made for digital cameras are
recommended. There is
usually a camera icon on the
packaging of these batteries.
• No batteries are required when
the camera is connected to the
system.
• If the camera will be
connected to the system for a
long period of time, it is
advisable to remove the
batteries to prevent battery
leakage.
Make sure that you insert the
batteries in the correct direction.
If they are inserted incorrectly,
they may explode or leak,
causing damage to the camera.