User Guide
IR REMOTE CONTROL INTERCHANGEABLE AC PLUGS
CONNECTIVITY
TECHNICAL SPECIFICATIONS
Power Output: 12W RMS x 2
Total System Peak Power: 48W
Frequency Range: 50–20,000 Hz
SNR: ≥ 85 dB
Operating Frequency: 2402–2480 MHz
Operating Range: Up to 10m / 33 ft, measured in open space. Walls and structures may
aect range of device
Maximum RF Output Power: 7 dBm
Bluetooth
Version:
Bluetooth
5.3”
Supported
Bluetooth
Proles: A2DP (Advanced Audio Distribution Prole), AVRCP (Audio
/ Video Remote Control Prole)
Supported Codec: SBC
Soundbar Input Rating: 15V
2.0A
Max Operating Temperature: 45°C
Power Adapter Model: GJ30WD-1500200DP
Input: 100–240V~, 50/60 Hz 0.8A
Output: 15V
2.0A, 30.0W
For CS (China)-
Note: Compliance marking are located at the bottom of this product
Power Button
Press once to turn on the soundbar.
Press once again to turn it o.
Input Selection Button
Press once to switch between USB Audio mode
and Bluetooth mode.
Press and hold for 2s to initiate Bluetooth
pairing mode.
Mute Button
Press once to mute the soundbar.
Press once again to unmute.
Volume + Button
Press once to increase volume.
Press and hold to incrementally increase
volume.
Volume - Button
Press once to decrease volume.
Press and hold to incrementally decrease
volume.
Play / Pause Button
Press once to play / pause audio playback.
Previous Track Button
Press once to return to previous track.
Next Track Button
Press once to skip to next track.
Tone - Button
Press to increase audio warmth, this will
increase the prominence of bass reproduction
and vocals.
Tone + Button
Press to increase audio brilliance, this will
increase the prominence of high and upper mid
frequencies, making the audio crisper.
Surround Button
Press once to activate Surround mode.
Press once again to turn it o.
Dialog Button
Press once to activate Dialog Plus mode.
Press once again to turn it o.
Reset Button
Press once to revert all changes made, including
Tone, Surround, and Dialog settings.
a
i
c
k
b
j
d
l
f
e
m
g
h
a
g
m
i
k
b
f
e
h
j
l
d
c
MASTER RESET
Press and hold the Multifunction button for 8s to perform a Master Reset. Upon com-
pletion, a voice prompt will trigger with the prompt “Reset To Factory Default” and the
soundbar will revert to its default state. Master Reset is reserved for cases where users
encounter issues while the soundbar is in use or during situations such as:
Bluetooth
Pairing failure, random LED blinks, or to reset all data.
8s
Tablets / Mobile Devices
PC / Mac
Bluetooth mode
Wall socket
Back View
PC / Mac PS5™ PS4™ Nintendo Switch
(Docked Mode)
Nintendo Switch™
(Handheld Mode)
Creative Stage SE features a power adapter with interchangeable AC plugs, suitable for
use in multiple regions. Refer to the instructions below for more information.
Note:
Interchangeable AC plug(s) are bundled based on the requirements in their
respective countries and are suitable for use in regions using the same AC plugs.
Replacing Interchangeable AC Plugs
i) Place the AC plug on the
power adapter, then push
it down and turn clockwise
direction to lock it
ii) Press to release the AC
plug from its attachment
iii) To replace or reattach
the AC plug, refer to the
initial steps given
*
For Singapore, only bundled EU AC plug is available.
1
2
China USA / Canada /
Japan / Taiwan
Australia
UK / Hong Kong /
Saudi Arabia / UAE / Malaysia
Korea
(Model KC)
EU / Singapore
*
(Model DE-1)
3