Getting Started Thank you for choosing Creative Sound BlasterAxx, the next generation Sound Blaster® that incorporates the powerful SB-Axx1 sound and voice processor. It is equipped with speaker and microphone functions for both listening and conferencing capabilities. The AXX 200 (SB1530) model design provides portability and low power consumption without compromising your audio pleasure. The AXX 200 comprises both right and left drivers within a single tower structure.
Registering Your Product Registering your product ensures you receive the most appropriate service and product support available. You can register your product during installation or at www.creative.com/register. Please note that your warranty rights are not dependent on registration. More Help For the latest news and products for the Sound Blaster, please visit www.soundblaster.com. The site also includes information on making purchases, technical help and the latest software updates.
Product Overview The AXX 200 is equipped with a variety of input and output jacks to enable connection to various devices. A touchscreen interface located at the top of the Sound BlasterAxx gives you basic control over the system's functions. This chapter looks at these features in detail. The Sound BlasterAxx Tower Indicator Description 1 Bluetooth Indicator The blue LED indicates that the Sound BlasterAxx is connected with a Bluetooth / NFC enabled device.
TouchScreen Controls Button / Slider Description 1 Voice Focus Toggles the Voice Focus function ON/OFF. Voice Focus is ON when the LED is lighted and dimmed otherwise. 2 Noise Reduction Toggles the Noise Reduction function ON/OFF. Noise Reduction is ON when the LED is lighted and dimmed otherwise. 3 Master Volume 8 segment slider indicates the speaker volume. Slide upwards to increase the volume or slide downwards to decrease the volume. 4 SBX Toggles SBX Pro Studio audio enhancements ON/OFF.
Audio Playback / Voice Recording 1 Button / Switch Description Power / Bluetooth Button When the AXX 200 is turned OFF, press the Power button once to power it ON; When the AXX 200 is turned ON, l Press the button once to enter Standby mode. In Standby, the AXX 200 will shut down automatically if there is no activity within 1 hour. l Press again to wake from Standby. l Press and hold the button for 2 seconds to enter Bluetooth pairing mode. l Press and hold the button for 5 seconds to power it off.
4 Button / Switch Description Next Track / Next Folder Button During audio playback, l Press once to go to the next track; l Press and hold to go to the next folder. When playback is stopped, you may press the button once to go to the next folder. 5 Voice Recording Button Press to start / stop voice recording. Note:The Mic Mute button pulses during recording. 6 Voice Playback Button Press to start / stop voice playback. Note: The Mic Mute button blinks rapidly during playback.
Connectivity - Input / Output Jacks Slot / Jack Description 1 MicroSD Slot Supports microSD card up to 32GB. You are able to save recorded voice files and playback audio files from the microSD card. 2 USB Port For charging external device, e.g. phone, MP3 player, etc. 3 Headphone Connects to stereo headphones with a 3.50mm (1/8inch) plug. 4 Aux / Mic In Connects to line-level sources (such as MP3 players) or microphones with a 3.50mm (1/8-inch) plug.
Setting Up Your Sound BlasterAxx The AXX 200 is a refined portable Sound BlasterAxx with built-in rechargeable battery, audio playback, Bluetooth connectivity and NFC feature. Simply operate it in standalone mode, powered by the built-in battery. Alternatively, you can either connect the AXX 200 to a computer via the USB, or connect it to the power supply. Standalone Mode (Battery Powered) The Sound BlasterAxx is now portable with its built-in battery.
Charging the Sound BlasterAxx Connect your AXX 200 to a power supply via an adapter or the Docking Base (available separately), or to your computer by using the MicroUSB-to-USB cable. Charge your Sound BlasterAxx for approximately 6 hours. It is recommended that you charge it for at least 8 hours before it is used for the first time. Note: l l l l Lithium-ion battery life may suffer when it is constantly fully depleted or overexerted at low voltage.
Connecting to a Power Supply Connecting to a Computer Setting Up Your Sound BlasterAxx 10
Connecting to the Sound BlasterAxx The AXX 200 is equipped with a microSD slot, a Micro-USB jack, an Aux In jack, and a build-in Bluetooth transceiver for connection to a wide array of devices. It can either be connected to your Bluetooth enabled devices, powered by its built-in battery, or by connecting to a computer or to a wall socket using a USB Power Adapter. This section illustrates the connection. PC / Mac Setting the Sound BlasterAxx as the default audio device: For Windows, i.
MP3 Players / CD Players and Other Portable Entertainment Devices Connecting to the Sound BlasterAxx 12
Bluetooth-Enabled Devices To enjoy your favorite music from your Bluetooth devices, simply follow these steps to connect them. Action LED Status Status Press the Power / Bluetooth button once to turn on the AXX 200. AXX 200 top panel and battery indicator are lit. AXX 200 is powered ON. Press and hold Power / Bluetooth button for 2 seconds. AXX 200 Bluetooth LED blinks rapidly. Pairing mode. Ready to be paired with new device. Turn ON the Bluetooth feature on your device.
NFC-Enabled Devices You may now pair your NFC-enabled devices with the AXX 200 with a single tap using the NFC technology. Simply follow these steps to connect them. Action LED Status Status Press the Power / Bluetooth button once to turn on the AXX 200. AXX 200 top panel and battery indicator are lit. AXX 200 is powered ON. Turn ON the NFC feature on your device. And touch your device on the NFC logo on AXX 200. If prompted "Are you sure you want to pair the Bluetooth device?", tap "Yes".
Aim the phone's sensor at the NFC logo on the AXX 200 before tapping the devices. To disconnect, tap your device with the AXX 200 again.
Advanced Teleconferencing Capabilities Video / Audio conferencing via the various instant messaging applications available in the market is made simpler with the AXX 200's built-in stereo microphones. With its powerful pickup and recording capabilities that are boosted further by the SB-Axx1 processor, the AXX 200 is the perfect personal wireless mobile teleconferencing system.
l l l CrystalVoice Smart Volume - Automatically adjusts the loudness of a voice to maintain a consistent volume level. CrystalVoice Focus - Creates a specific space where audio is picked up by the microphones so the listener hears only the conversation and no external parties. CrystalVoice FX - Enables alteration of voice with a variety of effects, to enable you to sound like a completely different person. To find out more about CrystalVoice technology, refer to Using the Software.
MP3/WMA Player, Voice Recording and Karaoke The built-in battery, microSD slot, audio playback (supports MP3, WMA or WAV files) and voice recording features on the AXX 200 offer a highly portable audio / music player with great audio quality to travelers. Audio playback from the microSD card Here's how to play back music from your microSD card using the built-in MP3/WMA Player. 1. Insert a microSD card into the microSD slot.
Organizing audio files on microSD card using a computer (for Windows OS) The MP3/WMA Player plays files according to the order in which they were being copied. In order for you to retain the order of the audio files that are being transferred from your computer to your microSD card, we recommend that you follow these steps below. 1. Organize the audio files alphabetically in a folder in the order that you would like them to appear on the microSD card. Close the folder. 2.
Voice recording onto the microSD card The AXX 200 comes with four high-quality microphones that deliver an all round 360° voice pick-up, making it ideal for accurate voice recording. Follow these steps to record your voice onto the microSD card. 1. Insert a microSD card. Note: - It is a good practice to use a new microSD card for recording. - The default recording sampling rate is at 16kHz. This is designed to record longer voice recording sessions (e.g. meetings, conference calls, etc.
Setting up Sound BlasterAxx for audio recording via software The Sound BlasterAxx is also equipped with a "What U Hear" feature, allowing you to turn your computer into a Karaoke station. Simply speak / sing into the AXX 200 to mix your voice input with music tracks, hearing the playback while recording. You can also record voice conversations held over instant messaging tools such as Google Talk, Skype etc.
The Karaoke on-the-go feature With the AXX 200, you can sing along to your favourite songs anytime, anywhere. To enjoy karaoke, simply follow these steps: 1. Choose your music source. - Stream music from your mobile device to the AXX 200 via NFC or Bluetooth, OR - Insert your microSD card into the AXX 200's microSD slot and press Play/Pause. 2. Switch on the Super Megaphone and sing along. Note: We recommend that you do not turn on Voice Focus in order to enjoy optimal dynamics.
Super Megaphone with VoiceFX and Siren The new Super Megaphone feature is able to amplify your voice on-the-fly. With the VoiceFX feature, you can also add various effects to your voice and change it to the voice of different characters! Sing along to any music with the Super Megaphone, and record it to a microSD card. Simply slide the Super Megaphone switch on the AXX 200 to turn on the Super Megaphone. Then, speak into the microphone behind.
Orc Female Male Munchkin Scrappy Kid Unstable Robot Echo 3. To select your desired voice effects, tap on the VoiceFX Scroll UP button (i.e. Call button) or the VoiceFX Scroll DOWN button (i.e. Mic Mute button) to scroll UP or DOWN the VoiceFX preset list. 4. Speak into the microphone behind and hear an altered version of your voice! To activate the siren, 1. Tap the Siren ON/OFF button (i.e. Noise Reduction button) twice. 2. Tap again to deactivate siren.
Interacting with Smartphone Voice Apps The AXX 200 comes with high-quality microphones that deliver an all round 360° voice pick-up. This makes it the perfect facilitator for using voice activated and voice recognition apps on smartphones. Speak to Siri or Android Voice Actions - or a whole range of apps like EVA, Voice Assist or Vlingo - with Sound BlasterAxx to make a call, play your music or search the internet. To begin using Sound BlasterAxx with your Bluetooth enabled smartphone, 1.
Connecting Headphones / Headsets Headphones and headsets can be connected to the Sound BlasterAxx via the Headphone jack. Please note that the Sound BlasterAxx's speaker will be automatically muted when a headphone is connected.
Installing the Mobile App or Software Sound Blaster Central app (mobile devices) Sound BlasterAxx comes with an amazing app, Sound Blaster Central, that supports both iOS and Android OS, so you can customize your audio – you now have total control right from the palm of your hand. Download Sound Blaster Central from the Apple App Store or Google Play Store.
Sound BlasterAxx Control Panel (PC and Mac) A specialized software for the Sound BlasterAxx is developed to provide additional enhancements to the audio and voice inputs and outputs of the product. The software bundle supports a range of operating systems including: l Windows 8, Windows 7, Windows Vista, Windows XP l Mac To take full advantage of your Sound BlasterAxx, we recommend downloading and installing this software into your computer.
5. Double-click the Install icon and follow the subsequent on-screen instructions to complete the installation. 6. Launch the Sound BlasterAxx Control Panel from the Applications > Creative > Sound BlasterAxx folder. Note: Depending on your operating system, model and software version, the user interface or color theme may differ.
Using the Software The rest of this chapter explains how to use the Sound BlasterAxx Control Panel to view and adjust the various features of your Sound BlasterAxx product. The examples and screenshots below uses Windows as an example. The UI for other operating systems may differ slightly. Managing Your Profiles The Sound BlasterAxx Control Panel comes equipped with a set of pre-configured profiles to suit your different needs including: l Music l Movies l Gaming To activate a profile, 1.
Adjusting Speaker Volume Via Software A master volume slider is available at the bottom left corner of the interface. Drag the slider to adjust the master volume. You can also mute / unmute the speaker by clicking the speaker icon to the left of the slider. Configuring Your General Settings You can change the language settings or restore settings to their default values. Click right corner of the interface and select the option from the list.
Enhancing the Audio - SBX Pro Studio To configure SBX Pro Studio, go to the SBX Profile screen, select a profile and click Edit to enter the SBX Pro Studio screen. By default, the SBX effect is turned on. You may adjust the effects on this screen. 1. Click the power button to toggle ON SBX Pro Studio. 2. Select the type(s) of enhancements to apply and drag the sliders to adjust the level for each enhancement. 3. Click to test the audio output, if necessary. 4.
l SBX Dialog Plus - enhances the voices in movies for clearer dialog, allowing the listener to hear the dialog over the rest of the soundtrack and over ambient noise in the listening environment.
Equalizer Settings To configure Equalizer settings, select a profile from the SBX Profile screen. Click Edit and then click Equalizer. To adjust and apply an equalizer preset, 1. Check the EQ checkbox to enable the use of the equalizer. 2. From the drop down menu, select the preset to use. 3. Adjust the vertical slider bars to achieve your desired level. 4. Click Save to save the changes to the active preset or to a new preset.
Enhancing the Microphone - CrystalVoice The AXX 200 is equipped with high-quality microphones, allowing you to easily carry out video/audio conferencing using popular VoIP applications such as Ventrilo® etc. CrystalVoice enhancements help to further this experience by enhancing the clarity of such communications. To configure CrystalVoice settings, click the CrystalVoice menu option on the left. Select a CrystalVoice profile and click Edit. 1.
CrystalVoice enhancements helps you hear and be heard clearly by all participants of the conference, doing away with noisy background distortions and unclear communication that disrupts your online gaming and chatting experience. The various enhancements available include: CrystalVoice Acoustic Echo Cancellation - eliminates echoes and enables the speaker to listen to the other parties clearly.
Speakers / Headphones Settings Each AXX 200 is equipped with a headphone jack, allowing you to connect your favorite headphones to the Sound BlasterAxx for audio output. Connecting headphones to the Sound BlasterAxx automatically mutes the speaker. From the software, you can check whether audio is played via speakers or headphones. 1. View the current settings for the speakers / headphones. 2. Click Test to hear a sample audio clip played back based on the settings.
Mixer Settings A mixer is also available via the software, allowing you to adjust the volume levels of individual outputs and channels including the microphone, speakers, etc. Simply click the Mixer option on the menu and adjust the volumes using the sliders.
Advanced Features The software also provides other advanced features including: l Bluetooth Auto Connection l Setting the Siren to Default On / Off Bluetooth Auto Connection The "Bluetooth Auto Connection" feature allows a paired Bluetooth device to be connected to the Sound BlasterAxx automatically. When the feature is enabled, the Sound BlasterAxx detects and reconnects to the previously paired Bluetooth device when it is turned on.
Voice Recording Settings The Sound Blaster AXX 200 Voice Recording Settings is an application that provides you the option to set the sampling rate of your AXX 200 to enhance your music and voice recordings. The default sampling rate at 16kHz is designed to record longer voice recording sessions (e.g. meetings, conference calls, etc.) and to avoid large file sizes. You can switch it to 48kHz, which is ideal for shorter, higher quality Karaoke music recording.
General Specifications Capacitive Touchscreen User Interface l Master Volume Slider with LED Backlight l Voice Focus On / Off button with LED Backlight l Noise Reduction On / Off button with LED Backlight l SBX Pro Studio Master On / Off button with LED Backlight l Speaker Mute button with LED Backlight l Mic Mute with button LED Backlight l Call button with LED Backlight Controls and Indicators l 3 white LEDs for power / battery indication l Blue LED for Bluetooth indication l Power / Bl
Bluetooth Profiles: l A2DP (Wireless Stereo Bluetooth) l AVRCP (Bluetooth Remote Control) l HFP (Hands-Free Profile) Bluetooth Operating Frequency: 2402 - 2480 MHz Bluetooth Operating Range: Up to 10 meters / 33 feet (Measured in open space. Walls and structures may affect range of device.) Audio Codec: AAC, SBC, aptX® Operating Temperature range: 0°C to 45°C (0°C to 40°C when powered by external power adapter) Lithium Ion Battery: 3.7 V 5200 mAh (19.
Troubleshooting and Support This chapter provides solutions to issues that may be encountered during the installation or usage of your Sound BlasterAxx. 1. The Sound BlasterAxx AXX 200 does not power on. The AXX 200 is designed to be powered on simply by the built-in battery. Make sure that the built-in battery is charged. It can also be powered on by connecting to a PC/laptop via USB or through a physical power socket using a USB Power Adapter.
Audio transmitted from your Sound BlasterAxx may be slightly delayed; this is due to the characteristics of Bluetooth technology. 5. There is no audio output from the AXX 200. Please check the following: l Headphones are not connected to the AXX 200. Connecting headphones automatically mutes the speaker. l Unplug the USB cable from the computer and plug it in again. l Check the volume level of the AXX 200 for the following: l Speaker Mute LED on the touchscreen is not lighted.
Then, check that the correct microphone is selected as the system sound input device. For Windows systems, i. Navigate to Control Panel > Sound > Recording tab. ii. In Recording tab, ensure that Microphone is selected instead of Internal Microphone Array. For Mac systems, i. Go to System Preferences and click Sound. ii. Click the Input tab and ensure that the correct microphone is selected as the input device. 10.
12. Unable to play other audio files on microSD card after playing voice recordings. After playing voice recordings, press the Play/Pause button twice. The AXX 200 will switch to music playback mode and start the playback of other audio files. 13. (For Mac OS) The music file still plays even after I have deleted it from the microSD card. To completely remove the music file, be sure to empty Trash on your desktop before ejecting the microSD card. 14.
Regulatory Information The following sections contains notices for various countries. Caution: This product is intended for use with FCC/CE certified computer equipment. Please check the equipment operating/installation manual and/or the equipment manufacturer to verify/confirm if your equipment is suitable prior to the installation or use of the product.
Notice for Canada This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Cet appareil numérique de classe B est conforme aux normes canadiennes NMB-003 et CNR-210. This device complies with Industry Canada licence-exempt RSS standard. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesirable operation.
European Compliance This product conforms to the following: RoHS Directive 2011/65/EU. EMC Directive 2004/108/EC. Mains operated products for the European market comply with Low Voltage Directive 2006/95/EC and Commission Regulation(s) Implementing Directive 2009/125/EC. Communication / RF wireless products for the European market comply with R&TTE Directive 1999/5/EC.
ATTENZIONE: ai fini della conformità con i requisiti del marchio CE europeo, il dispositivo deve essere installato in un computer certificato CE conforme ai limiti di Classe B. Tutti i cavi usati per collegare il dispositivo devono essere schermati, dotati di idonea messa a terra e avere una lunghezza massima di 3 metri. L'uso del dispositivo con computer non certificati o cavi non idonei può provocare interferenze ad altri dispositivi nonché danneggiare il prodotto stesso.
RoHS-richtlijn 2011/65/EU. Electrische producten voor de Europese markt voldoen aan de Laagspanningsrichtlijn 2006/95/EG en EC and Verordening(en) voor uitvoering van Richtlijn 2009/125/EG. Communicatie- of draadloze RF-producten voor de Europese markt voldoen aan de richtlijn R&TTE 1999/5/EG. LET OP: Om te voldoen aan de Europese CE-norm, moet dit apparaat zijn geïnstalleerd in computerapparatuur die CE-gecertificeerd is voor de Klasse B-limieten.
MODIFIERING: Alla förändringar och modifieringar som inte är uttryckligen tillåtna av Creative Technology limited eller något av dess filialföretag kan göra användarens garanti och garantirättigheter ogiltiga. Europeisk samsvar Dette produktet er i samsvar med følgende: EMC-direktivet 2004/108/EC. RoHS-Direktivet 2011/65/EU. Elektriske produkter til det europeiske markedet er i samsvar med Lavspenningsdirektivet 2006/95/EC og Økodesigndirektivet 2009/125/EC.
VAROITUS: Jotta tämä laite noudattaisi Euroopan CE-vaatimuksia , tämä laite on asennettava CEsertifioituun tietokoneeseen, joka noudattaa luokan B rajoituksia. Kaikki tämän laitteen liittämiseen käytetyt kaapelit tulee suojata ja maadoittaa eivätkä ne saa olla 3 m pidempiä. Luokan rajoituksia noudattamattoman tietokoneen tai vääränlaisten kaapeleiden käyttäminen voi aiheuttaa häiriöitä muihin laitteisiin tai haitata itse laitteen toimintaa.
EMC Директива 2004/108/EC. RoHS директива 2011/65/EU. Продукция с питанием от сети, поставляемая на европейский рынок, соответствует Директиве по низковольтному оборудованию 2006/95/EC и Имплементирующей директиве постановления (- й) комиссии 2009/125/EC. Коммуникационное/радио- беспроводное оборудование, поставляемое на европейский рынок, соответствует Директиве по оконечному радио- и телекоммуникационному оборудованию 1999/5/EC.
Όλα τα καλώδια που χρησιμοποιούνται για τη σύνδεση της συσκευής θα πρέπει να είναι θωρακισμένα, γειωμένα και να μην υπερβαίνουν σε μήκος τα 3μ. Η λειτουργία με μη πιστοποιημένους υπολογιστές ή λάθος καλώδια μπορεί να οδηγήσει σε παρεμβολές με άλλες συσκευές ή ανεπιθύμητες επιδράσεις στο προϊόν.
2004/108/EC EMC (Elektromanyetik Uyumluluk) Yönetmeliği. 2011/65/EU RoHS (Tehlikeli Maddelerin Kısıtlanması) Yönetmeliği Avrupa piyasasına yönelik, elektrik şebekesi tarafından çalıştırılan ürünler 2006/95/EC Alçak Gerilim Yönetmeliği (LVD ) ve 2009/125/EC Enerji ile İlgili Ürünlerin Çevreye Duyarlı Tasarımına İlişkin Yönetmeliğe uygundur. Avrupa piyasasına yönelik İletişim / RF kablosuz ürünleri Yönetmelik R&TTE 1999/5/EC ile uyumludur.
Ukraine RoHS Statement Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні, затвердженого постановою Кабінету Міністрів України від 3 грудня 2008 № 1057 Notice for Singapore Notice for Japan Recycling Rechargeable Battery Lithium rechargeable battery is a resource that can be recycled.
Vietnam RoHS Statement This product is in compliance with Circular 30/2011/TTBCT of the Ministry of Trade of the Socialist Republic of Vietnam (“Circular”), it does not contain the following substances in concentration greater than the Maximum Limit value as specified in the Circular.
Safety Information Refer to the following information to use your product safely, and to reduce the chance of electric shock, short-circuiting, damage, fire, hearing impairment or other hazards. Improper handling may void the warranty for your product. For more information, read the warranty available with your product. l Do not dismantle or attempt to repair your product. Refer all servicing to authorized repair agents.
Avoiding Hearing Damage Permanent hearing loss may occur if the headphone is used at high volume. Set the volume to a safe level. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected.
License and Copyright Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of Creative Technology Ltd. Copyright © 2013 Creative Technology Ltd. All rights reserved.
