User`s guide

Table Of Contents
Installing Software 3-3
Windows 98 Second
Edition
1. Connect your digital video (DV) camcorder to the Sound Blaster Audigy card and turn it on.
2. If prompted, insert the Windows 98 SE CD into the CD-ROM drive and click the OK button.
3. If a Version Conflict message appears, click the Ye s button to continue the installation.
4. Insert the Ulead VideoStudio installation CD into your CD-ROM drive.
5. Follow the instructions on the screen to complete the setup.
6. If prompted, click the Ye s button to let the setup program detect the MS DV drivers.
7. If prompted to install the Windows 98/98 Second Edition Qxxxxxx Update, click the Yes button.
8. When prompted, restart your system.
Windows Me
1. Connect your digital video (DV) camcorder to the Sound Blaster Audigy card and turn it on.
2. If prompted, insert the Windows Me CD into the CD-ROM drive and click the OK button.
3. Insert the Ulead VideoStudio installation CD into your CD-ROM drive.
4. Follow the instructions on the screen to complete the setup.
5. If prompted, click the Ye s button to let the setup program detect the MS DV drivers.
6. When prompted, restart your system.
Windows 2000
1. Connect your digital video (DV) camcorder to the Sound Blaster Audigy card and turn it on.
2. Insert the Ulead VideoStudio installation CD into your CD-ROM drive.
3. If prompted, click the Ye s button to let the setup program detect the MS DV drivers.
4. When prompted, restart the system.
In Windows 98 SE, Windows
Me and Windows 2000, to verify
that the driver was installed
successfully, click Start ->
Settings -> Control Panel.
Double-click the System icon.
Click the Device Manager tab
and double-click Sound, video
and game controllers. You
should see a list of Creative
devices.