User`s guide
Table Of Contents
- User’s Guide
- Creative Sound Blaster Audigy Platinum eX Creative Audio Software
- Contents
- Introduction
- About the Sound Blaster Audigy Card and external Audigy Drive
- Installing Hardware
- Installation Steps
- Step 1: Prepare the external Audigy Drive
- Step 2: Prepare your computer
- Step 3: Connect the Sound Blaster Audigy and Audigy Extension cards
- Step 4: Install the Sound Blaster Audigy and Audigy Extension cards
- Step 5: Install the external Audigy Drive
- Step 6: Connect the CD-ROM/DVD- ROM drive
- Step 7: Connect to power supply
- Connecting Related Peripherals
- Connecting Speaker Systems
- Connecting External Consumer Devices
- Positioning Your Speakers
- Installation Steps
- Installing Software
- Sound Blaster Audigy Applications
- Creative Sound Blaster Audigy Applications
- Creative Taskbar
- Creative Sound Blaster Audigy Online Quick Start (English only)
- Creative Sound Blaster Audigy Experience (English only)
- EAX ADVANCED HD™ Gold Mine Experience (English only)
- Creative Diagnostics
- Creative Surround Mixer
- Creative AudioHQ
- Creative WaveStudio
- Creative PlayCenter
- Creative Recorder
- Vienna SoundFont Studio
- Creative MiniDisc Center
- Creative RemoteCenter
- Creative Restore Defaults
- Using Applications
- General Specifications
- Troubleshooting & FAQ’s
- Problems Installing Software
- Problems with Sound
- Problems with File Transfers on Some VIA Chipset Motherboards
- Insufficient SoundFont Cache
- Problems With Joysticks
- Problems with Multiple Audio Devices
- Problems with Sound Blaster Live! Series or Sound Blaster PCI512 card
- Resolving I/O Conflicts
- Problems with Encore DVD Player (not included)
- Problems with Software DVD Player (not included)
- Problems with DV driver for Windows 98 SE/ 2000/Me/XP
- Problems with installing non- Creative applications
- Problems with Digital Devices
- Technical Support
Installing Hardware 2-2
Installing Hardware
Installation Steps
Step 1: Prepare the
external Audigy
Drive
1. Stick the four rubber feet to the underside in each corner of the external Audigy Drive as shown in
Figure 2-1.
2. Place the external Audigy Drive near your computer.
Turn off the main power supply
and disconnect your computer’s
power cord. Systems using an
ATX power supply unit with soft
power off may still be powering
the PCI slot. This can damage
your audio card when it is
inserted into the slot.
The rubber feet may differ in
some countries.
Figure 2-1: Sticking rubber feet