Installation guide

Installation Guide
Creative DSL PCI 7430
RFC 2364
Page 82 of 98
3.3.2 Hardware Diagnostics
Remember that the Diagnostic Tool is used to verify the Creative DSL PCI card functionality.
Running the ‘Diagnostic’ program will disconnect the NIC from the ADSL line. Close all Dial-up
sessions and close all files before running the ‘Diagnostic’ program.
Right click the Diagnostic Tool icon (located on the lower right-hand corner of the taskbar), then
select the Diagnostic option. A dialog box such as the one shown below will appear.
Product information (e.g. driver revisions) is displayed by clicking the Product Info tab.
Product Information lists the versions of the Diagnostic Tools (e.g. version 2.2) and the protocol
drivers installed (e.g. Version 2.0.11). The DLL version describes the software being used by
both the drivers and Diagnostic Tools software.
This information is helpful whenever making a technical support call. Click Close and
exit the product information window.