Installation guide

Installation Guide
Creative DSL PCI 7430
RFC 2364
Page 6 of 98
2.1 Installation in Windows 95
After installing your Creative DSL PCI 7430 card, plug the power cable back into the PC system
and turn the power on.
Before installing the Creative DSL PCI 7430 card, you must first install / upgrade
your Dial-Up Networking (DUN) application to version 1.3 or above. The
Microsoft DUN is conveniently included on the provided Creative DSL PCI 7430
installation CD-ROM under folder Drivers\Win95.
Please follow the steps below to upgrade your Win95 DUN:
(Also refer to Section 2.4.1: Creating an Internet Connection for Windows 95.)
• At your desktop, click Start and select Run from the menu. The ‘Run’ window appears.
• Insert the Creative DSL PCI 7430 installation CD-ROM into your PC CD-ROM drive.
Specify the path for the msdun13.exe file in the ‘Open’ box as
D:\Drivers\Win95\msdun13.exe or E:\Drivers\Win95\msdun13.exe and click OK.
• The ‘Microsoft Dial-Up Networking 1.3’ window appears with the message: ‘This will install
Microsoft Dial-Up Networking for Windows 95. Do you still wish to continue?’ Click Yes.
• An End-User License agreement will appear. Click Yes.
• The ‘Microsoft TCP/IP Networking ver.2.0’ setup window continues. Click OK.
• The ‘Microsoft Dial-Up Networking 1.3’ window appears again. You will be asked ‘do you
want to restart your computer now?’ Click Yes.
• Upon rebooting, Win 95 DUN setup and Network Identification screen appears. Define the
settings and click Close.
• The computer will ask you to insert the Win 95 CD. Specify the path for the Win 95 folder
on the CD, (D for example): Win 95 (e.g. D:\Win95), then click OK.
• The Copying File window appears next. Click OK.
• The system will ask for the Win 95 CD three more times. Repeat these steps until all
necessary files are installed.
• When installation is complete, the ‘Restart…’ window appears. Click Yes to finish the
installation.