Installation guide

Installation Guide
Creative DSL PCI 7430
RFC 2364
Page 73 of 98
The ‘Select OEM Option’ dialog box will have selected the Creative DSL DI7430, Click OK to
continue.
Window will continue loading files until the ‘Service Option’ dialog box appears. To accept the
default service option settings, click Next to proceed with the installation.
Unless there are special VPI and VCI values provided by your DSL Service Provider,
you should stay with recommended installation (the default value).
To change the VPI and VCI value, refer to Appendix A Section 3.1.1 ‘Changing VPI
and VCI values during Installation’.
During the installation process you may be asked to insert your Windows NT 4.0 CD-
ROM. Insert the Windows NT 4.0 CD-ROM into the CD-ROM drive and click OK.
If during the file copying process a file is reported as ‘not found’, enter the path
D:\i386 (or E:\i386).