Installation guide

Installation Guide
Creative DSL PCI 7430
RFC 2364
Page 3 of 98
1.2 Hardware Installation
To avoid possible damage to your Creative DSL PCI 7430, you should first touch
the metal chassis of your PC to discharge any static electricity.
Follow the steps to install your DSL PCI 7430 in your PC:
1 Shut down the system and switch the power to ‘off’
2 Unplug the AC power cable from the PC
3 Remove the metal cover of your PC chassis
4 Unscrew the ‘Metal Plate’ from an unused PCI slot
5 Insert the card into the unused PCI slot
6 Firmly press the DSL PCI 7430 into the slot and secure the card to the chassis with the chassis
bracket screw