Installation guide

Installation Guide
Creative DSL PCI 7430
RFC 2364
Page 9 of 98
During installation, Windows may again request you to insert the Creative DSL PCI
7430 installation CD. Clicks on OK and then browse to your systems CD-ROM
drive, for example, D:\ Drivers\Win95 (or E:\Drivers\Win95). Then click OK to
continue the installation.
Windows will continue loading the DSL driver until a ‘Service Option’ dialog box as shown
below appears. To accept the defaulted service option, click on Next to proceed the installation
process.
Unless there are special VPI and VCI values provided by your DSL Service
Provider, you should stay with the recommended installation (the default value).
To change the VPI and VCI value, refer to Appendix A: Section 3.1.1, Changing
VPI and VCI values during Installation.
During the installation process you may be asked to insert your Windows 95 CD.
Insert the Windows 95 CD into the CD-ROM drive and click OK. If during the file
copying process a file is reported as ‘not found’, please enter the path <CD Drive
letter>, for example D:\Win 95 (or E:\Win 95).
At the conclusion of the Creative DSL PCI 7430 driver installation, the Diagnostic Tool icon
(Referring to Appendix C) will appear, although inactive on the task bar. Once the Internet
connection is established, the Diagnostic Tool icon will then become active.