Table of Contents 1 INTRODUCTION ................................................................................................................ 1 1.1 Minimum System Requirements............................................................................................ 2 1.2 Hardware Installation........................................................................................................... 3 1.3 Installation CD-ROM .........................................................................
Installation Guide Creative DSL PCI 7430 RFC 2364 1 INTRODUCTION Creative Blaster DSL PCI 7430 is developed with the most advanced technology today, bringing very high-speed connections to common households through a regular phone line. With its DSL technology, you can now enjoy the ‘always on’ Internet connection, download and upload information within seconds, watch Internet movies, execute video conferencing, and view video clips without waiting for images to be delivered frame-by-frame.
Installation Guide Creative DSL PCI 7430 RFC 2364 1.
Installation Guide Creative DSL PCI 7430 RFC 2364 1.2 Hardware Installation To avoid possible damage to your Creative DSL PCI 7430, you should first touch the metal chassis of your PC to discharge any static electricity.
Installation Guide Creative DSL PCI 7430 RFC 2364 7 Connect one end of the supplied RJ-11 phone cable to the RJ-11 phone jack on the Creative DSL PCI card, and plug the other end of the phone cable to a wall phone jack where the DSL service is enabled 8 Replace the cover of the PC chassis 9 You are now ready to begin the DSL device installation 1.3 Installation CD-ROM Your Creative DSL PCI 7430 comes with an installation CD-ROM.
Installation Guide Creative DSL PCI 7430 RFC 2364 2 INSTALLATION IN WINDOWS 95, 98, AND NT4.0 This chapter provides you installation instructions for your Creative DSL PCI 7430 in Windows as well as setting up Internet connections and device driver uninstallation. It is organized as follows: 2.1 Installation in Windows 95 2.2 Installation in Windows 98 2.3 Installation in Windows NT 4.0 2.4 Creating an Internet Connection for Windows 95 and 98 2.5 Creating an Internet Connection for Windows NT 4.
Installation Guide Creative DSL PCI 7430 RFC 2364 2.1 Installation in Windows 95 After installing your Creative DSL PCI 7430 card, plug the power cable back into the PC system and turn the power on. Before installing the Creative DSL PCI 7430 card, you must first install / upgrade your Dial-Up Networking (DUN) application to version 1.3 or above. The Microsoft DUN is conveniently included on the provided Creative DSL PCI 7430 installation CD-ROM under folder Drivers\Win95.
Installation Guide Creative DSL PCI 7430 RFC 2364 TO Start the DSL 7430 Device Driver Installation -The ‘Add New Hardware Wizard’ will detect your Creative DSL PCI 7430 as a ‘PCI Network Controller’. Click Next. Insert the supplied Creative DSL PCI 7430 installation CD-ROM into your PC CD-ROM drive. The ‘Update Device Driver Wizard’ will try to detect the DSL 7430 Driver. Click Other Locations to proceed.
Installation Guide Creative DSL PCI 7430 RFC 2364 When ‘Select Other Location’ window appears, in the text entry bar, type in your Creative DSL PCI 7430 driver location path, for example, D:\Drivers\Win95 (or E:\Drivers\Win95). Then click OK. The ‘Update Device Driver Wizard’ will then find the Creative DSL 7430, click Finish.
Installation Guide Creative DSL PCI 7430 RFC 2364 During installation, Windows may again request you to insert the Creative DSL PCI 7430 installation CD. Clicks on OK and then browse to your systems CD-ROM drive, for example, D:\ Drivers\Win95 (or E:\Drivers\Win95). Then click OK to continue the installation. Windows will continue loading the DSL driver until a ‘Service Option’ dialog box as shown below appears. To accept the defaulted service option, click on Next to proceed the installation process.
Installation Guide Creative DSL PCI 7430 RFC 2364 In order for your new DSL PCI modem configuration to be effective, Windows will now ask to restart your computer. Click on Yes to continue. Congratulations! You have now successfully installed your Creative DSL PCI 7430 in Windows 95. You may now proceed to Section 2.4.1: Creating an Internet Connection for Windows 95 for setting up your DSL Internet connection.
Installation Guide Creative DSL PCI 7430 RFC 2364 2.2 Installation in Windows 98 After installing the Creative DSL PCI 7430, power on your PC. Windows 98 plug-and-play will auto-detect your DSL PCI 7430 as a new device for installation. A dialog box similar the one below will appear to confirm the detection of a new device. Click on Next to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 An ‘Add New Hardware Wizard’ dialog box appears next. Select ‘Search for the best driver for your device. (Recommended)’. Click on Next to continue. An ‘Add New Hardware Wizard’ dialog box will then appears in searching for the DSL 7430 driver. At this time, insert the provided Creative DSL PCI 7430 installation CD-ROM. Referring back to the dialog box on screen and check the ‘Specify a location’ box.
Installation Guide Creative DSL PCI 7430 RFC 2364 The next dialog box appears to confirm the detection of DSL PCI 7430 device driver. Click on Next to proceed the remaining driver installation process.
Installation Guide Creative DSL PCI 7430 RFC 2364 Windows will continue loading the DSL driver until a ‘Service Option’ dialog box as shown below appears. To accept the defaulted service option, click on Next to proceed the installation process. Unless there are special VPI and VCI values provided by your DSL Service Provider, you should stay with recommended installation (the default value). To change the VPI and VCI value, refer to Appendix A: Section 3.1.
Installation Guide Creative DSL PCI 7430 RFC 2364 Windows will continue loading and configuring your DSL PCI device driver. Finally, a dialog box similar to the one below will appear to confirm that you have successfully completed the driver installation process. Click on Finish. In order for your new DSL PCI 7430 configuration to be effective, Windows will now ask to restart your computer. Click on Yes to continue. Congratulations! You have now successfully installed your Creative DSL PCI 7430.
Installation Guide Creative DSL PCI 7430 RFC 2364 2.3 Installation in Windows NT 4.0 After installing the Creative DSL PCI 7430 into your PC, plug the power cable back in and power on the system. Windows NT Networking configuration must be installed first. From the Windows Desktop, right-click on the Network Neighborhood icon, then Properties. A ‘Network Configuration’ dialog box appears, click Yes to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 The ‘Network Setup Wizard’ dialog box appears, select ‘Wired to the network’ and click Next to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 A dialog box similar to the one below appears. Click on the Select from list… button to continue your network setup. The ‘Select Network Adapter’ dialog box will appear next, click on Have Disk… to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 Insert the Creative DSL PCI 7430 installation CD-ROM into your system CD-ROM drive. The drivers are located on your installation CD as and Drivers/Winnt, such as D:/Drivers/Winnt or E:/Drivers/Winnt according to your CD-ROM drive assignment. Click OK to continue. The ‘Select OEM Option’ dialog box will have selected the Creative DSL DI7430, click OK to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 The ‘Network Setup Wizard‘ will appear. Place a check mark next to the Creative DSL 7430 Adapter as shown below, click Next to continue. Select and check the TCP/IP Protocol box. Click Next to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 At the next ‘Network Setup Wizard” dialog box, observe that all services are checked, click Next to continue. Windows NT will now install networking components, click Next to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 When a ‘Windows NT Setup’ dialog box as the one shown below appears, insert your Microsoft Windows NT CD-ROM into your PC CD-ROM drive and enter the path and :\i386, such as D:\i386 or E:\i386 according to your CD-ROM drive assignment. Click Continue to proceed. Windows NT now needs a specific DSL device driver file, re-insert the Creative DSL PCI 7430 installation CD-ROM and click Retry to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 Again, Windows NT files are needed, re-insert the Microsoft Windows NT 4.0 CD-ROM at this point. Enter the path and :\i386, such as D:\i386 or E:\i386 according to your system CD-ROM drive assignment. Click Continue to proceed. Windows will continue loading files until a ‘Service Option’ dialog box appears. To accept the default service option settings, click Next to proceed with the installation.
Installation Guide Creative DSL PCI 7430 RFC 2364 The ‘Setup Message’ for Remote Access Services will appear. Click the OK button to install RAS. The ‘Windows NT Setup’ dialog box appears to request for more files. With the Windows NT 4.0 CD-ROM still in the CD-ROM drive, enter the path and :\i386, such as D:\i386 or E:\i386 according to your drive assignment. Click Continue to proceed. With the specified RAS Capable Device defined, click OK to continue the installation.
Installation Guide Creative DSL PCI 7430 RFC 2364 Confirm the selected device and click the Continue button. Click OK to proceed with the RAS installation. Select the ‘TCP/IP’ protocol and click OK to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 As a dialog box similar to the one shown below, accept the setting and click Continue to proceed. ‘Windows NT Setup’ now needs to install some more files, enter the path and :\i386 (e.g. D:\i386 or E:\i386) and click Continue to proceed.
Installation Guide Creative DSL PCI 7430 RFC 2364 A ‘Setup Message’ dialog box appears. Click OK and continue the installation. Confirm the following ‘Setup Message’ dialog by clicking the OK button.
Installation Guide Creative DSL PCI 7430 RFC 2364 When the ‘Network Setup Wizard’ dialog box appears, make sure that the all services option next to ‘Show Bindings for:’ is selected. Click Next to continue. As another ‘Network Setup Wizard’ dialog box appears. Click Next to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 Select the Workgroup option. Click Next to continue. As the dialog box similar to the one shown below appears, Windows NT has finished the network setup for your Creative DSL PCI 7430. Click Finish to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 In order for your new DSL PCI 7430 configuration to be effective, Windows will not ask to restart your computer. Click on Yes to restart the system. Congratulations! You have now successfully installed your Creative DSL PCI 7430. You may proceed to Section 2.4.3, Creating an Internet Connection for Windows NT 4.0 for setting up your DSL Internet connection in Windows NT 4.
Installation Guide Creative DSL PCI 7430 RFC 2364 2.4 Creating an Internet Connection for Windows 95, 98 and Windows NT 4.0 This section describes how to configure the DSL network service for your Creative DSL PCI. It is organized as follows: 2.4.1 2.4.1 Creating an Internet Connection for Windows 95 2.4.2 Creating an Internet Connection for Windows 98 2.4.3 Creating an Internet Connection for Windows NT 4.
Installation Guide Creative DSL PCI 7430 RFC 2364 To Start Creating an Internet Connection in Windows 95 -- Double click 'My Computer' and then Dial-Up Networking. Then select Make New Connection from the 'Dial-Up Networking' window.
Installation Guide Creative DSL PCI 7430 RFC 2364 Once you are inside the 'Make New Connection' window, notice that the name of the dial-up defaults to My Connection. You can name the connection anything you wish, for example type in: Creative DSL PCI 7430. In the ‘Select a device:’ bar, use the scroll down menu to locate the Creative DSL, then click Next.
Installation Guide Creative DSL PCI 7430 RFC 2364 A new 'Make New Connection' window appears. Enter any number for the Area Code and Telephone Number fields. The phone number ‘408’ & ‘123-4567’ is the default number since your DSL 7430 does not require dial-up. Any number that you specify in this field would work. However, due to Microsoft’s requirement, you need to enter any phone number in order for your system to proceed the DSL network connection. Click Next to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 Another 'Make New Connection' window appears next. It will indicate that you have successfully created a new Dial-Up Networking connection. Click Finish. The new Creative DSL PCI 7430 connection icon will appear in the 'Dial-Up Networking' window. Double-click this icon to log on for your DSL connection.
Installation Guide Creative DSL PCI 7430 RFC 2364 The 'Connect To' window appears. Type in the User name and Password that you have set up with your DSL Service Provider. Click Connect. Enter your User name and Password in the field. The phone number ‘1234567’ is the default number since your DSL 7430 does not require dial-up. Any number that you specify in this field would work.
Installation Guide Creative DSL PCI 7430 RFC 2364 The 'Connection Established' window will appear indicating You are connected to Creative DSL PCI 7430. Click Close and the 'Diagnostic Tool' icon will appear on the task bar.
Installation Guide Creative DSL PCI 7430 RFC 2364 2.4.2 Creating an Internet Connection for Windows 98 This section describes how to configure the DSL network service with your Creative DSL PCI 7430 when your PC is running with Windows 98. Double click 'My Computer' and then Dial-Up Networking.
Installation Guide Creative DSL PCI 7430 RFC 2364 Then select Make New Connection from the 'Dial-Up Networking' window. The ‘Location Information’ box will appear, enter the area (or city) code and click Close.
Installation Guide Creative DSL PCI 7430 RFC 2364 Once you are inside the 'Make New Connection' window, notice that the name of the dial-up defaults to My Connection. You can name the connection anything you wish, for example type in: Creative DSL PCI 7430. In the Select a device: bar, use the scroll down menu to locate the Creative DSL DI7430, then click Next.
Installation Guide Creative DSL PCI 7430 RFC 2364 A new 'Make New Connection' window appears. Enter any number for the Area Code and Telephone Number fields. The phone number ‘408’ & ‘123-4567’ is the default number since your DSL 7430 does not require dial-up. Any number that you specify in this field would work. However, due to Microsoft’s requirement, you need to enter any phone number in order for your system to proceed the DSL network connection. Click on Next to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 Another 'Make New Connection' window appears next. It will indicate that you have successfully created a new Dial-Up Networking connection. Click Finish. The new Creative DSL PCI 7430 connection icon will appear in the 'Dial-Up Networking' window. Double-click this icon to log on for your DSL connection.
Installation Guide Creative DSL PCI 7430 RFC 2364 The 'Connect To' window appears. Type in the User name and Password that you have set up with your DSL Service Provider. Click Connect. Enter your Username and Password here. The phone number ‘1234567’ is the default number since your DSL 7430 does not require dial-up. Any number that you specify in this field would work.
Installation Guide Creative DSL PCI 7430 RFC 2364 The 'Connection Established' window will appear indicating You are connected to Creative DSL PCI 7430. Click Close and the 'Diagnostic Tool' icon will appear on the task bar.
Installation Guide Creative DSL PCI 7430 RFC 2364 2.4.3 Creating an Internet Connection for Windows NT 4.0 This section describes how to configure the DSL network service with your Creative DSL PCI 7430 when your PC is running with Microsoft Windows NT 4.0. Double click 'My Computer' and then Dial-Up Networking.
Installation Guide Creative DSL PCI 7430 RFC 2364 Then ‘Location Information’ will appear. Enter the area code you are calling from and click Close. The ‘Dial-Up Networking’ window will appear stating ‘The phonebook is empty’. Click OK to add.
Installation Guide Creative DSL PCI 7430 RFC 2364 Once you are inside the ‘New Phonebook Entry Wizard' window, notice that the default name of the dial-up is to ‘MyDialUpServer’. You can name the connection anything you wish. For example, type in: Creative DSL DI7430 in the ‘Name the new phonebook entry:’ bar, and then click on Next to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 A new 'Phone Number’ window appears. Enter any number for the Phone number field. The phone number ‘408-123-4567’ is the default number since your DSL 7430 does not require dialup. Any number that you specify in this field would work. However, due to Microsoft’s requirement, you need to enter any phone number in order for your system to proceed the DSL network connection. Click on Next to continue. Enter any phone number in the field.
Installation Guide Creative DSL PCI 7430 RFC 2364 Another ‘New Phonebook Entry Wizard' window appears next. It will indicate that you have successfully created a new Dial-Up Networking connection. Click Finish. The new Creative DSL DI7430 connection appear in the 'Dial-Up Networking' window. Click Dial icon to to log on for DSL connection.
Installation Guide Creative DSL PCI 7430 RFC 2364 The 'Connect To' window appears. Type in the User name and Password that you have set up with your DSL Service Provider. Click OK. Enter your User name and Password in the field. Check both boxes below and click OK to complete the DUN setup. Congratulations! Your Creative DSL PCI 7430 Internet connection in Windows NT 4.
Installation Guide Creative DSL PCI 7430 RFC 2364 2.5 Uninstalling DSL 7430 in Windows 95 & 98 To delete the Creative DSL PCI 7430 device drivers, go to Start→ → Settings → Control Panel and select System. Double click on System. A ‘System Properties’ dialog box appears.
Installation Guide Creative DSL PCI 7430 RFC 2364 Select the Device Manager tab and a dialog box similar to the one shown below will appear.
Installation Guide Creative DSL PCI 7430 RFC 2364 Referring to the dialog box below, in the ‘Device Manager’ listing, click on Network adapters , select Creative DSL DI7430, and click Remove to proceed the device driver removal. A warning message ‘You are about to remove this device from your system’ will then appear. Click OK to remove the drivers.
Installation Guide Creative DSL PCI 7430 RFC 2364 Your PC system must be restarted for the changes to take effect. Click on Yes to restart your computer. ** You have now completed the steps in removing the DSL PCI 7430 device driver.
Installation Guide Creative DSL PCI 7430 RFC 2364 2.6 Uninstalling DSL 7430 in Windows NT 4.0 To uninstall Creative DSL 7430 device driver from your PC, from the PC desktop, right click on The Network Neighborhood icon, then Properties. The ‘Network’ dialog box appears next. Select the Creative DSL 7430b, and then click on the Remove button.
Installation Guide Creative DSL PCI 7430 RFC 2364 A ‘Warning’ message as the one below appears. Click Yes to confirm the removal. The ‘Network’ dialog box shows that the adapter has been removed from the system. Click Close to continue.
Installation Guide Creative DSL PCI 7430 RFC 2364 ‘Setup Message’ window appears, click on OK to continue the uninstallation process. ‘Network Settings Change’ dialog box as the one below then appears, click Yes and restart your computer for the changes to take effect. *** The Creative DSL PCI 7430 device driver is now successfully removed.
Installation Guide Creative DSL PCI 7430 RFC 2364 3 APPENDIX 3.1 Appendix A - Changing Your DSL Network Settings This section will guide your through setting up your VPI and VCI network settings. The driver should automatically setup these value for you, however if your DSL provider changes or updates to new VPI and VCI values, please read the following section to change your settings. 3.1.
Installation Guide Creative DSL PCI 7430 RFC 2364 A ‘Service Options’ window as the one shown below appears. Enter the VPI and VCI values provided by your ISP. Make sure the ‘Framing’ is set to LLC/SNAP. Click OK. Enter specific VPI and VCI values that supplied by your DSL service provider. Unless your DSL service provider provides instructions on ‘Select ADSL Mode’, do not change the default setting.
Installation Guide Creative DSL PCI 7430 RFC 2364 The previous ‘Service Option’ window will appear. Click on Next to continue the updated settings. Please refer back to Section 2.1 ‘Installation in Windows 95’, Section 2.2 ‘Installation in Windows 98’, and Section 2.3 ‘Installation in Windows NT 4.0’ for the remaining steps of the device driver installation.
Installation Guide Creative DSL PCI 7430 RFC 2364 3.1.2 Changing the VPI and VCI values after installation Right click on the light indicator of ‘Diagnostic Tools’, located at the lower right hand corner of your screen in the System Tray, as shown below. A diagnostic tool menu as shown below will appear.
Installation Guide Creative DSL PCI 7430 RFC 2364 A ‘Service Options’ window as the one shown below appears. Enter the VPI and VCI values provided by your ISP. Make sure the ‘Framing’ is set to LLC/SNAP. Click OK. Enter specific VPI and VCI values that supplied by your DSL service provider. Unless your DSL service provider provides instructions on ‘Select ADSL Mode’, do not change the default setting.
Installation Guide Creative DSL PCI 7430 RFC 2364 3.2 Appendix B – Windows NT 4.0 Installation with a Network Interface Card This section will help you to install your Creative DSL PCI 7430 in Windows NT 4.0 when a Network Interface Card has already been previously installed on your PC. From the Windows Desktop, right-click on the Network Neighborhood icon, then click Properties.
Installation Guide Creative DSL PCI 7430 RFC 2364 In the ‘Network’ window, click the Adapters tab.
Installation Guide Creative DSL PCI 7430 RFC 2364 In the Adapters tab, click the Add… button.
Installation Guide Creative DSL PCI 7430 RFC 2364 You will now come to a ‘Select Network Adapter’ window. Click Have Disk. At this time, please insert your Creative DSL PCI 7430 installation CD into your CD-ROM drive. Then type in the path of the DSL PCI 7430 device driver, such as e:\drivers\winnt (or f:\drivers\winnt, depending on where your CD-ROM drive is located).
Installation Guide Creative DSL PCI 7430 RFC 2364 The ‘Select OEM Option’ dialog box will have selected the Creative DSL DI7430, Click OK to continue. Window will continue loading files until the ‘Service Option’ dialog box appears. To accept the default service option settings, click Next to proceed with the installation. Unless there are special VPI and VCI values provided by your DSL Service Provider, you should stay with recommended installation (the default value).
Installation Guide Creative DSL PCI 7430 RFC 2364 The ‘Setup Message’ for the Remote Access Services will appear. Click the OK button to install RAS. The ‘Windows NT Setup’ dialog box appears to request for more files. With the Windows NT 4.0 CD-ROM still in the CD-ROM drive, enter the path and :\i386, such as D:\i386 or E:\i386 according to your drive assignment. Click Continue to proceed.
Installation Guide Creative DSL PCI 7430 RFC 2364 With the specified RAS Capable Device defined, click OK to continue the installation. Confirm the selected device and click Continue button.
Installation Guide Creative DSL PCI 7430 RFC 2364 The ‘Network’ window will reappear. Click Close to complete the installation.
Installation Guide Creative DSL PCI 7430 RFC 2364 In order for your new DSL PCI 7430 configuration to be effective, Windows will not ask to restart your computer. Click on Yes to restart the system. Congratulations! You have now successfully installed your Creative DSL PCI 7430. You may proceed to Section 2.4.3, Creating an Internet Connection for Windows NT 4.0 for setting up your DSL Internet connection in Windows NT 4.
Installation Guide Creative DSL PCI 7430 RFC 2364 3.3 Appendix C - Diagnostic Tools The ‘Diagnostic Tools’ allow you to monitor your Creative DSL PCI 7430 connectivity, setup the service connection address, and run diagnostic tests. The ‘Diagnostic Tools’ icon is displayed on the task bar as shown below. Diagnostic Tools Max. Transfer Rate Max. Receiving Rate By positioning the mouse cursor over the icon, a summary of your DSL PCI connection status is displayed, e.g. upstream and downstream line rates.
Installation Guide Creative DSL PCI 7430 RFC 2364 3.3.1 Avanced Diagnostic Tools On the Diagnostic Tools icon on the right hand side of the status bar, right-click the icon to display the menu as shown below. Click on Open. The ‘ADSL Diagnostic Tools’ window appears on the desktop as shown below. The three tabs of the Diagnostic Tools are ‘ADSL Status’, ‘Diagnostic’, and ‘ADSL Statistic’. The following is a brief explanation of the windows under each tab.
Installation Guide Creative DSL PCI 7430 RFC 2364 Diagnostic This window is used for hardware testing of the Creative DSL PCI 7430 card. ADSL Statistic This window keeps tabs on errors that might affect the overall system performance. The counts are reset whenever the PC system is restarted. This window contains three sub-categories: a. ADSL Information Re-training Count This tracks the number of ADSL connections performed.
Installation Guide Creative DSL PCI 7430 RFC 2364 3.3.2 Hardware Diagnostics Remember that the Diagnostic Tool is used to verify the Creative DSL PCI card functionality. Running the ‘Diagnostic’ program will disconnect the NIC from the ADSL line. Close all Dial-up sessions and close all files before running the ‘Diagnostic’ program. Right click the Diagnostic Tool icon (located on the lower right-hand corner of the taskbar), then select the Diagnostic option.
Installation Guide Creative DSL PCI 7430 RFC 2364 Click Run Diagnostics to run the diagnostic program that will test PC functionality and report the status. A warning message pops up that your DSL service will be disconnected before performing the Diagnostic test. If connected to the Internet at this time, running diagnostic will disconnect any Dial-up sessions. Click Yes to begin the Diagnostic program or click No to exit the diagnostic program.
Installation Guide Creative DSL PCI 7430 RFC 2364 3.3.3 Troubleshooting If you have completed the Creative DSL PCI 7430 installation procedures and your DSL connection is not operational, then refer to the following guidelines for assistance in getting your DSL PCI 7430 connection up and running. Questions & Answers 1 Why isn’t there a Diagnostic Icon on the Taskbar? q Restart your PC to allow all new setup to be effective.
Installation Guide Creative DSL PCI 7430 RFC 2364 3.3.4 Connector Pin-out The Creative DSL PCI 7430 is equipped with a RJ-11 jack for connection to the DSL data port. The center two pins, pins 3 and 4, are used for DSL data. For the Creative DSL PCI 7430 card to make a proper DSL connection, the installed DSL data port should also use pins 3 and 4 for data. If the DSL data port installation uses pins 2 and 5 for data, then a wiring converter will be required.
Installation Guide Creative DSL PCI 7430 RFC 2364 4 CONTACT INFORMATION Reach us by Phone: Telephone support is available Monday through Friday, 8:30am to 5:30pm, Pacific Standard Time. To reach our DSL support by phone, please call: Digicom Technical Support Hotline: (408) 719-5179 Reach us by E-Mail: You may also send your questions and comments to the following E-Mail address: E-Mail: info@digicomsys.com Reach us by Mail: Digicom Systems Inc.
Installation Guide Creative DSL PCI 7430 RFC 2364 5 WARRANTY INFORMATION DSI warrants that equipment furnished will be free from defects in material and workmanship for a period of (3) three years from the confirmed date of purchase of the product new from the retail location. Upon written notice of any such defect, the manufacturer will, at its option, repair or replace the defective item under the terms of this warranty, subject to the provisions and specific exclusions listed herein.
Installation Guide Creative DSL PCI 7430 RFC 2364 6 REGISTRATION CARD Creative DSL PCI 7430 Product Registration Name: Company: Address: City/State/Zip: Phone: E-mail: Serial Number: Purchased from: Date of Purchase: Please cut out the above Product Registration Card and send in with a self-addressed stamped envelope to: DIGICOM SYSTEMS INC.
Installation Guide Creative DSL PCI 7430 RFC 2364 FCC Registration Information for Users This product is compliant and registered with the CFR47-Part 68 of the Federal Communications Commission (FCC).
Installation Guide Creative DSL PCI 7430 RFC 2364 DISCLAIMER: © 2000 Digicom Systems, Inc. All rights reserved. Digicom logo is a registered trademark of Digicom Systems, Inc. in the United States and/or other countries. Creative logo and brand name are trademarks or registered trademarks of Creative Technology Ltd. in the United States and/or other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
Installation Guide Creative DSL PCI 7430 RFC 2364 Page 98 of 98