Specifications

PS2000 Installation Instructions
For more information contact Hubbell Wiring Device Kellems
Toll free [phone] or www.hubbell-wiring.com
P a g e | 2
Rev. 4.1--12.12.13
1.0 Introduction & Overview 3
1.1 Product overview 3
Figure 1- PEP Station 3
1.2 Product specifications 4
1.3 Electrical wiring requirements and information 5
Figure 2 –Single Phase Input and Hardwired Ethernet Connection 6
Figure 3- Single Phase Input and Cellular/Wi-Fi Connection 6
Figure 4- Three Phase Input and Hardwired Ethernet Connection 7
Figure 5- Three Phase Input and Hardwired Cellular/Wi-Fi Connection 7
2.0 Pedestal Mounted PEP Station Installation 8
2.1 Before you start 8
2.2 Component list 8
2.3 Pedestal mounted PEP Stations installation diagrams and images 9
Figure 6- Installation location examples 9
Figure 7- Installation example 10
Figure 8- Installation example 10
2.4 Concrete pedestal installation process and checklist 11
Figure 9- Excavation 11
Figure 10- Reinforcement and conduit 11
Figure 11- Reinforcement 11
Figure 12- Mounting plate/J-bolt assembly 12
Figure 13- Mounting plate installation 12
Figure 14- Electric vehicle signage (parking space) 13
Figure 15- Electric vehicle signage (parking lot) 13
2.5 Concrete pedestal installation diagrams 14
Figure 16- Top view 14
Figure 17- Section 14
Figure 18- Isometric 14
Figure 19- Front view 15
Figure 20- Side view 15
2.6 Securing the component housing and wiring the PEP Station 16
Figure 21- Exploded isometric 17
3.0 Wall Mounted PEP Station Installation 18
3.1 Before you start 18
3.2 Component List 18
3.3 Wall mounting bracket installation process and checklist 19
Figure 22- Isometric 19
Figure 23- Isometric 19
Figure 24- Electric vehicle signage (parking space) 20
Figure 25- Electric vehicle signage (parking lot) 20
Figure 26- Front view 21
Figure 27- Side view 21
3.4 Securing the component housing 22
Figure 28- Exploded isometric 23
4.0 Startup Procedure 24
Figure 29- Home screen 24