Specifications

PS2000 Installation Instructions
For more information contact Hubbell Wiring Device Kellems
Toll free [phone] or www.hubbell-wiring.com
P a g e | 17
Rev. 1.0--
Rev. 4.1—12.12.13
(4) ½” Hex nuts
(4) ½” Locking
washers
(4) ½” Flat
washers
¾” Conduit
bushing
1 ¼” Conduit
bushing
Sealing gasket
¾” Conduit for low-
voltage Ethernet wire
1 ¼” Conduit for (2)
dedicated 208-
240V/30A circuits
(4) ½”x 6” J-bolts, leave
1-1/4” max. above
steel mounting plate
8”x 8” x 1/16” Steel
mounting plate set in
concrete
Tamper proof screw
threaded inserts
12”x 12” Reinforced
black concrete base
and footing with
tapered top
Figure 21
Back of the concrete
base and PEP Station