Specifications

PS2000 Installation Instructions
For more information contact Hubbell Wiring Device Kellems
Toll free [phone] or www.hubbell-wiring.com
P a g e | 9
Rev. 1.0--
Rev. 4.1—12.12.13
2.3 Pedestal mounted PEP Station installation diagrams
The diagrams below in Figure 6 indicate possible installation locations and orientation for PEP Stations within the
parking lot. The letter ‘F’ indicates the front of the PEP Station component housing.
Figure 6
Important: PEP Stations should be
installed flush with the front edge
of the curb and do not require
protective bollards.