Specifications

Installing PC-CAM 600 14
In Windows XP 1. Do not connect PC-CAM 600 to your computer before installing the drivers.
If you accidentally begin installation with PC-CAM 600 connected, the Found
New Hardware Wizard dialog box appears. Click the Cancel button.
2. Insert the PC-CAM 600 installation CD.
3. Click the names of the drivers and applications you want to install on your
computer, and then click the OK button.
4. Follow the instructions on the screen to complete the installation.
Do not restart your computer until all the drivers and applications are installed.
5. Connect PC-CAM 600’s USB cable to an available USB port on your computer (see
Figure 1-4). Windows automatically detects the device.
6. Place PC-CAM 600 on top of your
computer monitor or another flat surface.
7. When the Light Frequency Selection
dialog box appears (see Figure 1-8),
select the option that represents your
power supply frequency, and then click
the OK button.
At the time of this product's
release, Microsoft strongly
encouraged companies to
submit their hardware solutions
for certification. If a hardware
device driver is not submitted,
or does not qualify, for
Microsoft certification, a
warning message appears.
You may see this message
when installing this driver or
update. If you do, you may
choose to click the Continue
Anyway button. Creative has
tested this driver or update on
Windows XP, and it does not
impair or destabilize your
computer.
If you need more XP-related
information, go to the product’s
web site.
Figure 1-8: The Light Frequency Selection
dialog box.