Specifications

Installing PC-CAM 350 1-10
6. Two Digital Signature Not Found dialog
boxes will appear, one at a time, telling you
that Creative PC-CAM 350 (Still
Image) and Creative PC-CAM 350
(Video) (Figure 1-6) have been detected.
7. Click the Yes button. The PC-CAM 350
Camera Configuration dialog box
appears.
8. Check the image in the Video preview
pane. If it flickers or displays a series of
dark bands, click the Cancel Flicker
button.
9. Click the Finish button, and then restart
your computer if you are prompted to do
so.
In Windows XP 1. Do not connect PC-CAM 350 to your computer before installing the drivers.
If you accidentally begin installation with PC-CAM 350 connected, the Found
New Hardware Wizard dialog box appears. Click the Cancel button.
2. Insert the PC-CAM 350 CD into your CD-ROM drive.
3. Click the names of the drivers and applications you want to install on your
computer.
4. Follow the instructions on the screen to complete the installation. You may be
asked, after an application is installed, if you want to restart your computer. Do
not restart your computer until all the drivers and applications are installed.
5. Connect PC-CAM 350’s USB cable to an available USB port on your computer
(Figure 1-5). Place PC-CAM 350 on top of your computer monitor or another flat
surface. Windows automatically detects the device.
Figure 1-6: Digital Signature Not Found
dialog box.