Specifications

Installing PC-CAM 350 1-8
5. Connect PC-CAM 350’s USB cable to an available USB port on your computer (see
Figure 1-5). Place PC-CAM 350 on top of your computer monitor or another flat
surface. You can connect the camera while the computer is turn on.
Windows automatically detects the device.
i. If you are prompted to insert the Windows 98 CD, replace the PC-CAM 350 Installation
CD with the appropriate CD.
Note: Windows 98 is available in various editions. Be sure to use the correct edition for
your computer.
ii. In the Insert Disk dialog box, click the OK button.
iii. Follow the instructions on the screen.
• The USB port(s) of certain
computers may be found
on the front panel instead
of the back panel.
• You can also attach the
camera to a self-powered
USB hub.
Figure 1-5: Connecting PC-CAM 350 to the computer.
USB cable
USB port