Specifications

Portable Drying/Conveying Systems Chapter 4: Operation 49 of 76
4-3 Shutting Down the Dryer
1. Turn off the conveying system supplying the drying hopper and/or machine. Press the
SHUTDOWN button for the dryer to complete its cycle.
2. When processing is complete, close the hopper slide gate and shut down any in-line companion
equipment, such as the aftercooler.
3. If the dryer is shut down using the SHUTDOWN button on the dryer status screen, the process
heater will shut off and the bed regeneration process will be completed. When the dryer is started at
a later date the process air will be directed through the bed that was regenerated last.
4. If the dryer control switch is turned off without using the dryer shutdown feature, the dryer and the
on board conveying system will stop immediately. When the dryer is started at a later date, the
process air will be directed through the last bed that was being used when the dryer control switch
was turned off. If a bed was being regenerated when the dryer control switch was turned off, the
regeneration process would begin over again on that same bed.