Specifications

Portable Drying/Conveying Systems Chapter 4: Operation 40 of 76
SYSTEM SETUP
This screen allows the operator to set alarm and password features.
ALARM OFF DUR is the amount of time (0-99 minutes) that the alarm and horn will stay
off after the alarm silence button is pushed. (When this function is set to 0, this feature will
never turn off. When it is set to 99, it will stay off until another alarm occurs.)
OPER PW is the four (4) digit number that allows access to the station and pump status
screen and the station operator screen. (When this feature is set to 0000 these screens are not
password protected.)
OPER PW DUR is the amount of time (5-99 minutes) the password will allow access to the
associated screens. The screen changes to the station status screen when the time expires.
SETUP PW (default is 1234) is the four (4) digit number that allows access to the setup
screens. (When this is set to 0000 there is no password protection.). Store password in a
secure location.
SETUP PW DUR is the amount of time (5-99) the password will allow access to the
associated screens. When the time expires, the screen changes to the station status screen.
Note: If password(s) feature is enabled, please write down your
passwords and file them in a secure location.
At this point the operator can return back to the MAIN MENU or SYSTEM MENU, or
MORE to access the CONVEYING CONFIGURATION screen, by touching the appropriate
button on the screen.
By pressing the either buttons will activates or deactivates material conveying to
each unit. NOT PESENT indicates that this particular feature is not configured to
operate.
At this point the operator can return back to the MAIN MENU or SYSTEM MENU, or
BACK to access the SYSTEM SETUP screen, by touching the appropriate button on the
screen