Specifications

Portable Drying/Conveying Systems Chapter 4: Operation 39 of 76
Enter the values you would like to set in the screen by pressing the number keys. Press ENT
(Enter) when you are finished to set the new values or CLR (Clear) to erase the current
values and reenter new ones. To set the values in the next field, press ENT (Enter) to close
the screen shown above. Then select the next number field to enter new values.
Starting the Conveying Process
To start the conveying process, touch the button labeled PUSH TO START in the
Conveying Status screen. To stop the conveying system, press the same button again. When
the system is running, it will be labeled PUSH TO STOP.
Touching the MAIN MENU button will return the operator back to the overall menu screen.
In this screen, the operator will be able to select the button which controls SYSTEM setup
and monitoring functions.
System Menu
The above screen will allow the operator to set/review operating parameters;
• SYSTEM SETUP
• SET CLOCK
• HOUR METERS
• ALARM HISTORY
• I / O STATUTUS (Input and output status)
• SYSTEM BACKUP
• SERVICE
• MAIN MENU