Specifications

Portable Drying/Conveying Systems Chapter 4: Operation 38 of 76
values and reenter new ones. To set the values in the next field, press ENT (Enter) to close
the screen shown above. Then select the next number field to enter new values.
Drying Hopper Setup
This screen allows the user to set the number of times that the machine will try to convey
material (before setting off the alarm) and the number of times that the RPV will cycle. In
addition, the user can turn on and off the Special Convey, Low Level Alarm, and the No
Convey Alarm and the RPV features.
Pressing the SPECIAL CONVEY DISABLED button will activate this conveying system
feature. Pressing SPECIAL CONVEY ENABLED will deactivate this feature.
Pressing the LOW LEVEL DISABLED button will activate this conveying system feature.
Pressing LOW LEVEL ENABLED will deactivate this feature.
Pressing the NO CONVEY DISABLED button will activate this conveying system feature.
Pressing NO CONVEY ENABLED will deactivate this feature.
Once the parameters have been set for the DRYING HOPPER SETUP, the operator can
return to the CONVEY STATUS, or press BACK to return to MAIN MENU, or press
MORE to access the DRYING HOPPER SETUP RPV screen.
Drying Hopper Setup RPV (Requires additional RPV & patch cord
)
Pressing the RPV DISABLED button will activate this conveying system feature. Pressing
RPV ENABLED will deactivate this feature.
The RPV CYLE time will indicate for how many seconds the drying hopper will convey
material from the second source (1-99 seconds).
Pressing the BACK button will take the user to the DRYING HOPPER OPERATOR
SETUP screen. If the conveying options have already been configured, the user can press
the CONVEY STATUS button to return to the CONVEY STATUS screen.
Setting Values
By pressing and holding the numbers in the NO CONVEY ALARM and the RPV CYCLE
button, the following screen will be displayed: