Specifications

Portable Drying/Conveying Systems Chapter 4: Operation 37 of 76
Pressing the BACK button will take the user to the MACHINE 2 OPERATOR screen. If
the conveying options have already been configured, the user can press the CONVEY
STATUS button to return to the CONVEY STATUS screen.
Setting Values
By pressing and holding the numbers in the NO CONVEY ALARM button, the following
screen will be displayed:
Enter the values you would like to set in the screen by pressing the number keys. Press ENT
(Enter) when you are finished to set the new values or CLR (Clear) to erase the current
values and reenter new ones. To set the values in the next field, press ENT (Enter) to close
the screen shown above. Then select the next number field to enter new values.
Drying Hopper Operator
This screen allows the user to change the Conveying Time (in seconds), Dump Delay
Time (in seconds), and the Percentage of Time that the RPV Operates (adding to the
amount of material conveyed). In addition, it allows the user to view the last time that
material was conveyed (in seconds).
Pressing the SETUP button will take the user to the DRYING HOPPER SETUP screen. If
the machine has already been setup, the user can press the CONVEY STATUS button to
return to the CONVEY STATUS screen.
Setting Values
By pressing and holding the numbers in the Conveying Time (1-99 seconds), Dump
Delay Time (10-99 seconds), or the RPV MAT B (1-99%) button, the following screen
will be displayed:
Enter the values you would like to set in the screen by pressing the number keys. Press ENT
(Enter) when you are finished to set the new values or CLR (Clear) to erase the current