Specifications

Portable Drying/Conveying Systems Chapter 4: Operation 36 of 76
Machine 2 Operator
This screen allows the user to set the Conveying Time (1-99 seconds) and Dump Delay
(10-99 seconds) time in seconds. It will also provide the amount of time it took to convey
the last load of material from the drying hopper to the machine.
Pressing the SETUP button will take the user to the MACHINE 2 SETUP screen. If the
machine has already been setup, the user can press the CONVEY STATUS button to return
to the CONVEY STATUS screen.
Setting Values
By pressing and holding the numbers in the CONVEY TIME or the DUMP DELAY buttons,
the following screen will be displayed:
Enter the values you would like to set in the screen by pressing the number keys. Press ENT
(Enter) when you are finished to set the new values or CLR (Clear) to erase the current
values and reenter new ones. To set the values in the next field, press ENT (Enter) to close
the screen shown above. Then select the next number field to enter new values.
Machine 2 Setup
This screen allows the user to set the number of times that the machine will try to convey
material before setting off the alarm. In addition, the user can turn on and off the Special
Convey Alarm, Low Level Alarm, and the No Convey Alarm features.
Pressing the SPECIAL CONVEY DISABLED button will activate this dryer feature.
Pressing SPECIAL CONVEY ENABLED will deactivate this feature.
Pressing the LOW LEVEL DISABLED button will activate this dryer feature. Pressing
LOW LEVEL ENABLED will deactivate this feature.
Pressing the NO CONVEY DISABLED button will activate this dryer feature. Pressing NO
CONVEY ENABLED will deactivate this feature. (Level sensor required)