Specifications

Portable Drying/Conveying Systems Chapter 4: Operation 34 of 76
Momentarily pressing the M1, M2, DH, MB, or HB icons on the screen will darken or turn
them black. This indicates they are active in the conveying system.
To access the Operator Screens for the hoppers, press and hold the M1, M2 or DH icons
on the screen.
Machine 1 Operator
This screen allows the user to set the Conveying Time (1-99 seconds) and Dump Delay
(10-99 seconds) time in seconds. It will also provide the amount of time it took to convey the
last group of material from the drying hopper to the loader.
Pressing the SETUP button will take the user to the MACHINE 1 SETUP screen. If the
machine has already been setup, the user can press the CONVEY STATUS button to return
to the CONVEY STATUS screen.
Setting Values
By pressing and holding the numbers in the CONVEY TIME or the DUMP DELAY buttons,
the following screen will be displayed:
Enter the values you would like to set in the screen by pressing the number keys. Press ENT
(Enter) when you are finished to set the new values or CLR (Clear) to erase the current
values and reenter new ones. To set the values in the next field, press ENT (Enter) to close
the screen shown above. Then select the next number field to enter new values.
Machine 1 Setup
This screen allows the user to set the number of times that the machine will try to convey material
before setting off the alarm. In addition, the user can turn on and off the Special Convey
Alarm, Low Level Alarm, and the No Convey Alarm features.