Specifications

Portable Drying/Conveying Systems Chapter 4: Operation 27 of 76
• DRYER SETUP (some submenus are password protected, see pg. 40)
• OVERDRY PROTECT (requires supervisory password see pg. 40)
• ALARMS
• AUTO TUNE (requires supervisory password see pg. 40)
• DEW PT SETUP (Dew Point Setup)
• AUTO START (requires supervisory password see pg. 40)
• MAIN MENU
DRYER STATUS
Pressing the DRYER STATUS button will take the operator back to the original status
screen shown on page 25. Pressing MENU will return you back to the menu screen.
DRYER SETUP
By pressing the LOW or HIGH alarm buttons, the operator can enter the desired values to
enable the alarm to go off at a specific deviation from set point (on the high or low side).
When these settings have been made, the operator now has a choice of returning to the
DRYER MENU, BACK (takes you back to the DRYER MENU) or pressing MORE to
take you to screen 2 of 3 of the DRYER SETUP screen.
Buy pressing the MORE screen, you can choose for the temperatures to display in degrees F
or degree C. Caution; Changing the temperature scale, requires adjusting the alarm values.
When these settings have been made, the operator now has a choice of returning to the
DRYER MENU, BACK (takes you back to the DRYER SETUP 1 of 3) or pressing MORE
to take you to screen 3 of 3 of the DRYER SETUP screen.