Specifications

Portable Drying/Conveying Systems Chapter 4: Operation 26 of 76
5. Auto start Timer Enabled
6. Autotune in Progress
7. Over-dry Protect Active
8. Dryer Offline
9. Left Bed Heat
10. Left Bed Cool
11. Left Bed Ready
12. Right Bed Heat
13. Right Bed Cool
14. Right Bed Ready
Start Button
The START BUTTON allows the user to stop and start the dryer manually. When the start
button is pressed, the dryer begins to operate. The text in the button will change from
START to SHUTDOWN. The next time the button is pressed, the dryer will go into a
sequence shutdown and the button text will change to RESTART. The process heater will
shut off, the current bed regeneration will be completed and then the blower will stop. If
sequence shutdown is not desired, turning the POWER SWITCH off will turn off all
components of the dryer immediately and the optional conveying system will be turned off
also.
Setting Values
By pressing and holding the numbers in the SETPOINT or the SWITCH button, the
following screen will be displayed:
Enter the values you would like to set in the screen by pressing the number keys. Press ENT
(Enter) when you are finished to set the new values or CLR (Clear) to erase the current
values and reenter new ones. To set the values in the next field, press ENT (Enter) to close
the screen shown above. Then select the next number field to enter new values.
Dryer Menu
Pressing this button will take the user to another screen where more machine parameters can
be viewed and adjusted.
Dryer Menu Screen
The screen shown above will allow the operator to set/review operating parameters for the
following:
• DRYER STATUS