User`s guide

Configuring Settings 4-2
5. When the Profile Edit dialog box
appears, click the Encryption tab
(Figure 4-2).
To configure WEP
6. Click the Authentication box and
select Auto.
7. Click the Data Encryption box
and select WEP.
8. Click the Key Length box and
select 64 or 128 bits.
9. Select the Hex or ASCII option.
10. Type either Hex (10 or 26
characters) or ASCII (5 or 13
characters) values. These keys
serve as passwords that encrypt
your data before transmission.
11. Click the OK button.
To configure WPA-PSK
6. Click the Authentication box and
select WPA-PSK.
7. Click the Data Encryption box
and select TKIP or AES.
8. In the Pre-shared Key box, type
a password, which encrypts your
data before transmission.
9. Click the OK button.
Figure 4-2
It is recommended
that you set up WEP or
WPA-PSK encryption.
This can help prevent
unauthorized users
from accessing your
network. For more
information on
encryption settings,
refer to "Configuring
Settings" on page 4-1.