Quick Start Guide

12
Listening to FM Radio
To change the FM region
Perform these steps when scanning for stations for the
first time.
1. Press the Menu button.
2. Select the Settings icon (Figure 7). A list appears.
3. Select the FM Region icon (Figure 8). A list appears.
4. Select the region that you are in.
To perform an autoscan and autosave
1. Select the FM Radio icon (Figure 9).
A radio frequency appears on the LCD screen.
2. Press the Menu button again.
3. Select the Autoscan icon (Figure 10). The player
scans and stores channels it detects. At the end of the
autoscan, it automatically saves all channels and plays
the first channel.
To select a channel
1. Select the FM Radio icon (Figure 9).
A radio frequency appears on the LCD screen.
2. Select the preset channel you want.
For more information, read the User’s Guide on the Installation CD.
Go to d:\manual\<language>\manual.pdf (replace d:\ with the drive letter of your CD-ROM/
DVD-ROM drive, and <language> for the language the document is in)
Figure 7
Figure 8
Figure 9
Figure 10
MuVo2 FM QSB 3rd draft.fm Page 12 Wednesday, July 21, 2004 4:35 PM