User`s guide

3
En
Using headphones
❒ For private listening, you can
connect headphones to the
Headphones Output of the
remote control.
This will mute all speakers.
❒ Select MASTER volume mode
to adjust the volume of your
headphones.
❒ Select TREBLE mode to adjust
the treble levels of your
headphones.
❒ Select SUB mode to adjust the
bass levels of your headphones.
Notes
• When you disconnect your headphones
from the
Headphones Output , the
speaker system will revert to the default
MASTER volume setting (two Level
Indicators
lit), so as to prevent high
headphones volume levels from being
applied to the speaker system.
•
REAR mode and CENTER mode are
disabled when you are using headphones.
Muting the volume
❒ To temporarily mute speakers or
headphones, press the MUTE
button once.
All lit Level Indicators will
blink during mute mode.
❒ To return to normal listening,
press the MUTE button again.
Alternatively, you can disable
mute mode by pressing either
or .
Understanding
Input Connectors
Figure 2: Input connectors on the rear panel
MegaWorks THX 6.1 650D provides
three sets of input connectors:
❒ 6.1 Analog inputs for up to 6.1
channels
❒ Auxiliary Analog Stereo input
for up to 2 channels
❒ Digital input for up to 5.1
channels from multichannel
audio cards with digital output.
See “Connecting Input Devices” on
page 4 for details of cable
requirements. Basic cables for all the
inputs are supplied.
Note: In certain situations, you may
require additional cables that are not
provided.
MWorks THX 650D CLE.book Page 3 Wednesday, January 8, 2003 10:03 AM