User manual

Installing Creative WebCam Pro 1-4
In Windows 2000
1. Do not connect Creative WebCam Pro to your computer before installing the
drivers.
If you accidentally begin installation with Creative WebCam Pro connected, the
Found New Hardware Wizard
dialog box appears. Click the
Cancel
button.
2. Insert the Creative WebCam Pro CD into your CD-ROM drive.
3. Click the names of the drivers and applications you want to install on your
computer.
4. Follow the instructions on the screen to complete the installation. You may be
asked, after an application is installed, if you want to restart your computer.
Do not restart your computer until all the drivers and applications are
installed.
5. Connect Creative WebCam Pro’s USB cable to an available USB port on your
computer (Figure 1-2). Place Creative WebCam Pro on top of your computer
monitor or another flat surface, or fix it to your laptop screen (Figure 1-3).
Windows automatically detects the device.
6. When a
Digital Signature Not
Found
dialog box appears, telling
you that
Creative WebCam Pro
(Figure 1-4) has been detected,
ignore the message and click the
Yes
button.
Installation will be complete in a
while.
7. Check the image in the
Video
preview
pane of the
Creative
WebCam Pro Camera
Configuration
dialog box. If it
flickers or displays a series of dark
bands, click the
Cancel Flicker
button.
Figure 1-4: Digital Signature Not Found
dialog box.