User`s guide

SoundBlaster Live! 5.1 Audio Card 15
Filename: m1adsbb.doc Title: Self-cover booklet [6.25 x 7.75]
Template: HP-Print2K.dot Author: WASSER Studios Last Saved By: TheresaZ
Revision #: 54 Page: 15 of 26 Printed: 10/02/01 02:12 PM
Connecting Speaker
Systems
To watch DVD movies, play games, or to listen
to music on your computer, connect analog
or digital speakers to the SoundBlaster Live!
audio card.
When using an external Dolby digital (AC-3)
decoder speaker system, disconnect the audio
card AUX_IN connector from the decoder card
Audio Out connector. However, if an external
Dolby Digital (AC-3) decoder speaker system is
not available, do not disconnect the audio card
AUX_IN connector.
Analog Speakers
When connecting analog speakers, you may
have a triple stereo audio cable or three pairs
of 3.5-mm-to-RCA (stereo) cables. These
three cables connect to the front, rear, and
center/subwoofer inputs.
Additional information for advanced users: For
connection to center and subwoofer channels
using a 3.5-mm-to-RCA (stereo) cable, connect
the white RCA connector to the center input and
the red RCA connector to the subwoofer input of
the amplifier.