User`s guide

10 HP Pavilion home PC
Filename: m1adsbb.doc Title: Self-cover booklet [6.25 x 7.75]
Template: HP-Print2K.dot Author: WASSER Studios Last Saved By: TheresaZ
Revision #: 54 Page: 10 of 26 Printed: 10/02/01 02:12 PM
Installing the Software
To use SoundBlaster Live! on the Windows Me
and Windows XP operating systems, install the
device drivers and software included on the
driver installation CD. Follow these steps to
install the driver software that came with your
SoundBlaster Live! audio card.
1 After you have installed the SoundBlaster Live!
audio card, turn on your computer. The
Windows Plug and Play feature automatically
detects the audio card and device drivers. If
the New Hardware Found dialog box
appears, click the Cancel button.
2 Insert the driver installation CD into the
CD-ROM or DVD-ROM drive.
3 Click OK when the SoundBlaster Live! screen
appears. Follow the onscreen instructions to
install the driver software.
Note:
In the Speaker Preset Setup screen, select the
number of speakers you will be using to hear
proper sound from all speakers.
If this SoundBlaster Live! screen does not appear
automatically, open My Computer and right-
click the CD-ROM or DVD-ROM drive icon that
contains the driver installation CD, and then click
AutoPlay. Follow the onscreen instructions to
install the driver software.
For more information about the SoundBlaster
Live! software, refer to the onscreen
SoundBlaster Live! User’s Guide.
To access the SoundBlaster Live! User’s Guide:
1 Click Start.
2 Choose Programs in Windows Me, or
choose All Programs in Windows XP.
3 Choose Creative and SoundBlaster Live!
and then click User’s Guide.