Specifications

Extra FeaturesB-1
BExtra Features
This chapter provides you with information on key features found on your Creative Inspire 5.1 Digital
5700.
Using the Mix Feature
One key feature of the Creative Inspire 5.1 Digital 5700 is its ability to mix both Digital and Analog
signals.
It allows simultaneous playback through the following input configurations:
❑ Optical and Line In
❑ Coaxial and Line In
❑ Digital DIN (AC-3) and Line In
❑ Digital DIN (PCM-2 channel) and Line In
Note:
• In this feature the CMSS processor will process only Analog (Line In) Front signals
• In this feature
the Dolby Pro Logic processor will process only Digital (Optical, Coaxial or Digital DIN)
Substituting a
Powered Subwoofer
You may substitute a powered subwoofer for the subwoofer that comes with your Creative Inspire 5.1
Digital 5700. Connect its line level input (typically an RCA jack) to the dedicated Subwoofer Line Out on
the back of the Decoder Amplifier, using a shielded audio cable with RCA plugs on each end. Refer to the
powered subwoofer’s User Manual for adjustment procedures.
En_Inspire5700-lic.book Page 1 Tuesday, September 18, 2001 8:33 AM