User`s guide

11
The FPS2000 Digital comes with a
front/rear audio signal cable.
Connect this cable between your
sound card and the subwoofer (see
diagram J).
1. Insert one of the green
miniplugs into the green
minijack (LINE OUT) on
your sound card.
2. Insert the corresponding
black miniplug into the
black minijack (REAR OUT)
on your sound card.
3. Insert the green miniplug at
the other end of the cable
into the minijack (FRONT)
on the subwoofer.
4. Insert the black miniplug
into the minijack (REAR) on
the subwoofer.
Audio Signal Connections
J
Note: If you have a stereo sound card
(one without a rear stereo minijack line
output), connect a green miniplug cable
to the LINE OUT minijack of your
sound card and the opposite green
miniplug to the FRONT minijack on the
subwoofer. This will cause both left
front and left rear satellites to play the
left stereo channel and both right
satellites to play the right stereo
channel.
FRONTREAR