User Guide

EARBUDS FIT GUIDE
Gently push and wiggle the earbuds into the respective ear canal
until a good seal is made to ensure proper tting. Additional pairs of
silicone tips are also provided so users can achieve an optimal t.
2. 4.1. 3.
Creative Sensemore Air supports Qi-enabled wireless charging. To charge both the charging case and earbuds wirelessly, slot the earbuds into the
case’s magnetic charging slots, then place the charging case on the wireless charging pad*. Do note that the earbuds cannot be charged wirelessly
without its charging case.
*Wireless charging pad not included
CHARGING CREATIVE SENSEMORE AIR WIRELESSLY
MASTER RESET
Touch the earbuds and hold for 5s while they are in the charging case. Earbuds will blink once
in blue upon completion of Master Reset. Master Reset is reserved for cases where users
encounter issues while earbuds are in use or during situations such as:
Bluetooth Pairing failure, random LED blinking, failure to pair secondary earbud with the main
earbud, or to reset all data.
Common Connectivity Issues
This article highlights a phenomena and recommendation for music cutting out and earbuds that do not stay connected.
When pairing a smart mobile device with the earbuds, the signal is strongest when there is a line-of-sight between the pairing devices.
If the signal passes through the body, which is mostly made up of water uid, it may get absorbed, which may result in pairing diculty. If the
mobile device is already connected to the earbuds, it may result in signal lost or the earbuds may get disconnected.
Preventing Oscillating Whistling Noise
When Sensemore Mode or Ambient Mode is enabled, there is a possibility of an oscillating whistling sound produced by the earbuds when the
built-in microphones are blocked or while it’s being held in the palm of your hand. It may also occur when the earbuds are kept away without its
charging case in an enclosed area or through humid conditions and / or perspiration.
To prevent this occurrence,
• Ensure the built-in microphones are not blocked by your palm or hand, and to keep the earbuds dry
• Turn o Sensemore Mode / Ambient Mode before placing the earbuds back in its charging case
• Reduce the level of Sensemore Mode / Ambient Mode via the Creative app
• Ensure that the charging case is adequately charged before placing the earbuds back in its charging case to charge
5s
TECHNICAL SPECIFICATIONS
Headphones Drivers
• 6 mm Bio-cellulose Driver x 2
• Frequency Response: 20–20,000 Hz
Microphones
• Type: Omni-directional x 4
• Frequency Response: 100–10,000 Hz
• Sensitivity (1 kHz): -38 dBV / Pa
Interface
• Qi-compatible wireless charging, USB-C (charging)
Wireless Operating Range
• Up to 10m / 33 ft
• RF Output Power: < 8 dBm
• Operating Frequency: 2402–2480 MHz
Bluetooth Version
• Bluetooth 5.2
Bluetooth Proles
• A2DP (Advanced Audio Distribution Prole)
• AVRCP (Audio / Video Remote Control Prole)
• HFP (Hands-free prole)
Battery
• Earbuds (Left and Right)
Lithium-ion polymer battery:
3.7V 60 mAh 0.222 Wh
• Battery Charging Case
Lithium-ion polymer battery:
3.7V 400 mAh 1.48 Wh
Input Rating
• 5V
1A
Total Playtime
• Up to 35 hours
Charging Time
• 2–3 hours
Audio Codecs
• AAC, SBC
Sweat & Water Resistance for Earbuds
• IPX5
Operating Temperature
• 0–45°C
© 2022 Creative Technology Ltd. All rights reserved. Creative, the Creative Logo and Sensemore are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other
countries. The Bluetooth
®
word mark and logo are owned by Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. Siri is a trademark of Apple Inc., registered
in the U.S. and other countries. All other trademarks are the property of their respective owners and are hereby recognized as such. All specications are subject to change without notice. Actual
product may dier slightly from images shown. Use of this product is subject to a limited warranty.
CREATIVE APP
Set up your product, customize playback controls,
personalize audio settings, enhance the product’s
performance, and more with the Creative app.
• Choose between Sensemore Mode and Ambient Mode
• Customize buttons for personalized playback experience
• Adjust noise control level through Sensemore Mode, Ambient
Mode, and Active Noise Cancellation
• Modify audio settings with Graphic EQ
• Perform software upgrades, product registration, and more
Download the Creative App from:
iOS App Store Google Play Store