Installation guide

Installation Guide
Creative DSL USB 7410
RFC1483
Page 3 of 40
1. INTRODUCTION
Creative DSL USB 7410 is developed to bring modem users into the digital era by
providing high-speed Internet connections using their current phone lines. An interface
via USB connection and extremely simple hardware installation allows Creative DSL
7410 users to quickly setup and configure their DSL network.
This user’s guide provides information on how to setup and configure the Creative DSL
USB 7410 in Windows 98. Before starting the device driver installation, it is essential
that you carefully review the following sections:
1.1 Minimum System Requirements
1.2 Hardware Installation
1.3 Installation CD-ROM
1.4 Before Installation
1.1. Minimum System Requirements
The Creative DSL USB 7410 requires the following system:
•
Pentium II 233 or higher IBM compatible PC
•
Windows 98 Operating System
•
32MB of RAM
•
20MB free hard disk space
•
One available USB port
•
CD-ROM drive for DSL 7410 driver installation
•
Subscribed service with a DSL service provider
•
One RJ-11 phone cable: connects DSL 7410 to a DSL service-ready phone line
(supplied with package)
•
Optional: User may also need access to the Windows 98 installation CD-ROM.