User`s manual

Installing and Testing Modem Drivers 3-14
Testing the
Installation in
Windows NT
1. Click Start -> Settings -> Control Panel.
2. Double-click the Modems icon.
3. The Modems Properties dialog box similar to
Figure 3-23 appears.
If your Creative Modem Blaster V.92 PCI
DI5791 is listed, the installation is successful.
If your modem is not responding, it may be due to
a conflict between the modem and another
peripheral device. To resolve the conflict, you
must change the settings on your modem (see
“Resolving Hardware Conflicts” on page B-4).
Figure 3-23: Modem Properties dialog box.