User`s manual

Installing and Testing Modem Drivers 3-12
Installing the
Modem Driver in
Windows NT
1. Turn on your computer and insert the
Installation CD into your CD-ROM drive.
2. Click Start -> Run.
3. In the Run dialog box similar to Figure 3-18, click
the Browse button and locate the driver files in
E:\Drivers\WinNT\setupdsi.exe (where E:
represents your CD-ROM Drive), and then click the
OK button.
4. When the dialog box similar to Figure 3-19 appears,
click the OK button.
5. When the dialog box similar to Figure 3-20
appears, click the OK button.
6. Click Start -> Settings -> Control Panel.
7. Double-click the Modems icon.
8. In the Install New Modem dialog box, click the
Next button.
9. Follow the onscreen instructions to continue the
installation of your modem.
Be sure to allow Windows to auto-detect your
modem card.
Figure 3-18
Figure 3-19
Figure 3-20