User`s guide
Table Of Contents
- Tecra 9000 Series User’s Guide
- Contents
- Introduction
- Chapter 1 - Finding Your Way Around
- Chapter 2 - Getting Started
- Chapter 3 - Connecting Other External Devices
- Using external display devices
- Using an external keyboard
- Using a mouse
- Connecting a local printer
- Connecting an external diskette drive
- Connecting external speakers or headphones
- Connecting an external microphone
- Using an expansion device
- Adding memory
- Using Slim SelectBay® modules
- Inserting and removing hard drives
- Inserting and removing PC Cards
- Inserting an SD Media card
- Connecting your modem to a telephone line
- Using the i.Link® port
- Chapter 4 - Learning the Basics
- Computing tips
- Windows basics
- Using the keyboard
- Using the AccuPoint II
- Using the TOSHIBA Console button
- Starting a program
- Saving your work
- Printing your work
- Using a compact disc drive
- Using PC Cards
- Using SD Media cards
- Using your computer at the office
- Using a computer lock
- Caring for your computer
- Power down options
- Chapter 5 - Power Management
- Chapter 6 - Exploring Your Options
- Chapter 7 - WinDVD
- Chapter 8 - Toshiba Utilities
- Chapter 9 - Keeping Your Files Safe
- Chapter 10 - Troubleshooting Guide
- Problems that are easy to fix
- Problems when you turn on the computer
- Resolving a hardware conflict
- Using the Windows 2000 troubleshooting feature
- A plan of action
- Resolving hardware conflicts on your own
- Memory card problems
- Power and the batteries
- Keyboard problems
- AccuPoint II problems
- Display problems
- Disk drive problems
- Modem problems
- Problems with the CDROM or DVD-ROM drive
- Sound system problems
- Optional devices
- PC Card problems
- Printer problems
- Internet Problems
- DVD operating problems–Windows 2000
- WinDVD problems
- Developing good computing habits
- Use VirtualTech
- If you need further assistance
- Other Toshiba Internet Web sites
- Toshiba’s worldwide offices
- Appendix A - Windows 98SE Supplmental Information
- Appendix B - Hot Keys
- Appendix C - Power Cable Connectors
- Appendix D - Video Modes
- Glossary
- Index
80
Connecting Other External Devices
Inserting an SD Media card
Inserting an SD Media card
To insert an SD Media card, turn the card so that the connector
(metal area) faces down then push the card in the slot until it locks
in place.
If Windows
®
does not recognize an inserted SD Media card,
remove and insert it again.
To remove an SD Media card, press the card inward to release it.
The card pops out slightly.
The green LED on the front of the computer will glow when the
card is being accessed.
CAUTION: Do not touch the SD Media connector. You could
expose the storage area to static electricity which can destroy
data.
Do not remove an SD Media card while data is being written
or read. Even when the message “copying...” in the windows
disappears, the computer may be writing to the computer
and your data could be destroyed. Wait for the SD Media
indicator light to go out.
Connecting your modem to a telephone line
Your computer comes with a built-in modem that can be
connected to a standard voice-grade telephone line.
The modem allows you to:
❖ Access the Internet.
❖ Communicate with your office’s local area network (LAN), or
a larger corporate wide area network (WAN).
For specific information about connecting to a LAN or WAN,
consult your network administrator.
❖ Send a fax directly from your computer.