User`s guide
Table Of Contents
- Tecra 9000 Series User’s Guide
- Contents
- Introduction
- Chapter 1 - Finding Your Way Around
- Chapter 2 - Getting Started
- Chapter 3 - Connecting Other External Devices
- Using external display devices
- Using an external keyboard
- Using a mouse
- Connecting a local printer
- Connecting an external diskette drive
- Connecting external speakers or headphones
- Connecting an external microphone
- Using an expansion device
- Adding memory
- Using Slim SelectBay® modules
- Inserting and removing hard drives
- Inserting and removing PC Cards
- Inserting an SD Media card
- Connecting your modem to a telephone line
- Using the i.Link® port
- Chapter 4 - Learning the Basics
- Computing tips
- Windows basics
- Using the keyboard
- Using the AccuPoint II
- Using the TOSHIBA Console button
- Starting a program
- Saving your work
- Printing your work
- Using a compact disc drive
- Using PC Cards
- Using SD Media cards
- Using your computer at the office
- Using a computer lock
- Caring for your computer
- Power down options
- Chapter 5 - Power Management
- Chapter 6 - Exploring Your Options
- Chapter 7 - WinDVD
- Chapter 8 - Toshiba Utilities
- Chapter 9 - Keeping Your Files Safe
- Chapter 10 - Troubleshooting Guide
- Problems that are easy to fix
- Problems when you turn on the computer
- Resolving a hardware conflict
- Using the Windows 2000 troubleshooting feature
- A plan of action
- Resolving hardware conflicts on your own
- Memory card problems
- Power and the batteries
- Keyboard problems
- AccuPoint II problems
- Display problems
- Disk drive problems
- Modem problems
- Problems with the CDROM or DVD-ROM drive
- Sound system problems
- Optional devices
- PC Card problems
- Printer problems
- Internet Problems
- DVD operating problems–Windows 2000
- WinDVD problems
- Developing good computing habits
- Use VirtualTech
- If you need further assistance
- Other Toshiba Internet Web sites
- Toshiba’s worldwide offices
- Appendix A - Windows 98SE Supplmental Information
- Appendix B - Hot Keys
- Appendix C - Power Cable Connectors
- Appendix D - Video Modes
- Glossary
- Index
76
Connecting Other External Devices
Inserting and removing PC Cards
Inserting and removing PC Cards
Your Tecra
®
9000 Series computer comes with two stacked PC
Card slots and supports three types of PC Cards:
❖ Type I cards—You can install up to two of these cards, one in
each slot.
❖ Type II cards—You can install up to two of these cards, one in
each slot.
❖ Type III cards—You can install just one of these cards.
Inserting a PC Card
Before you insert a PC Card, refer to the documentation that
comes with the card to see if you need to do anything before you
insert it.
To insert a PC Card:
1 Locate the PC Card slot on the right side of the computer.
2 If the PC Card slots are locked, unlock them by turning the
computer over, locating the PC Card lock, removing the
retaining screw, sliding the lock into the unlocked position,
and replacing the screw.
3 Insert the PC Card.
If you have a Type III card, insert it into the lower part of the
slot. If you have a Type I or Type II card, insert it into either
the upper or lower part of the slot.