User`s guide
Table Of Contents
- Tecra 9000 Series User’s Guide
- Contents
- Introduction
- Chapter 1 - Finding Your Way Around
- Chapter 2 - Getting Started
- Chapter 3 - Connecting Other External Devices
- Using external display devices
- Using an external keyboard
- Using a mouse
- Connecting a local printer
- Connecting an external diskette drive
- Connecting external speakers or headphones
- Connecting an external microphone
- Using an expansion device
- Adding memory
- Using Slim SelectBay® modules
- Inserting and removing hard drives
- Inserting and removing PC Cards
- Inserting an SD Media card
- Connecting your modem to a telephone line
- Using the i.Link® port
- Chapter 4 - Learning the Basics
- Computing tips
- Windows basics
- Using the keyboard
- Using the AccuPoint II
- Using the TOSHIBA Console button
- Starting a program
- Saving your work
- Printing your work
- Using a compact disc drive
- Using PC Cards
- Using SD Media cards
- Using your computer at the office
- Using a computer lock
- Caring for your computer
- Power down options
- Chapter 5 - Power Management
- Chapter 6 - Exploring Your Options
- Chapter 7 - WinDVD
- Chapter 8 - Toshiba Utilities
- Chapter 9 - Keeping Your Files Safe
- Chapter 10 - Troubleshooting Guide
- Problems that are easy to fix
- Problems when you turn on the computer
- Resolving a hardware conflict
- Using the Windows 2000 troubleshooting feature
- A plan of action
- Resolving hardware conflicts on your own
- Memory card problems
- Power and the batteries
- Keyboard problems
- AccuPoint II problems
- Display problems
- Disk drive problems
- Modem problems
- Problems with the CDROM or DVD-ROM drive
- Sound system problems
- Optional devices
- PC Card problems
- Printer problems
- Internet Problems
- DVD operating problems–Windows 2000
- WinDVD problems
- Developing good computing habits
- Use VirtualTech
- If you need further assistance
- Other Toshiba Internet Web sites
- Toshiba’s worldwide offices
- Appendix A - Windows 98SE Supplmental Information
- Appendix B - Hot Keys
- Appendix C - Power Cable Connectors
- Appendix D - Video Modes
- Glossary
- Index
243
7 Select the port settings according to the instructions in your
printer’s documentation and the port to which your printer is
connected, then click Next.
The Add Printer Wizard prompts you to enter a “friendly”
printer name.
8 Enter a name for your printer, then click Next.
HINT: If you are using more than one printer, make sure the
printer name is descriptive enough for you to identify each
one.
9 If you want this printer to be:
❖ The default printer for Windows
®
98 Second Edition,
click Ye s .
❖ Available when specifically requested, click No.
10 Click Next.
Windows
®
98 Second Edition prompts you to print a test
page.
11 If your printer is connected and turned on, click Finish to
print a test page.
To complete the setup procedure without printing a test page,
click No, then click Finish.
You are now ready to print.
12 Click OK to print.
Depending on your program, you may see various messages
indicating the status of your print job.