User`s guide
Table Of Contents
- Tecra 9000 Series User’s Guide
- Contents
- Introduction
- Chapter 1 - Finding Your Way Around
- Chapter 2 - Getting Started
- Chapter 3 - Connecting Other External Devices
- Using external display devices
- Using an external keyboard
- Using a mouse
- Connecting a local printer
- Connecting an external diskette drive
- Connecting external speakers or headphones
- Connecting an external microphone
- Using an expansion device
- Adding memory
- Using Slim SelectBay® modules
- Inserting and removing hard drives
- Inserting and removing PC Cards
- Inserting an SD Media card
- Connecting your modem to a telephone line
- Using the i.Link® port
- Chapter 4 - Learning the Basics
- Computing tips
- Windows basics
- Using the keyboard
- Using the AccuPoint II
- Using the TOSHIBA Console button
- Starting a program
- Saving your work
- Printing your work
- Using a compact disc drive
- Using PC Cards
- Using SD Media cards
- Using your computer at the office
- Using a computer lock
- Caring for your computer
- Power down options
- Chapter 5 - Power Management
- Chapter 6 - Exploring Your Options
- Chapter 7 - WinDVD
- Chapter 8 - Toshiba Utilities
- Chapter 9 - Keeping Your Files Safe
- Chapter 10 - Troubleshooting Guide
- Problems that are easy to fix
- Problems when you turn on the computer
- Resolving a hardware conflict
- Using the Windows 2000 troubleshooting feature
- A plan of action
- Resolving hardware conflicts on your own
- Memory card problems
- Power and the batteries
- Keyboard problems
- AccuPoint II problems
- Display problems
- Disk drive problems
- Modem problems
- Problems with the CDROM or DVD-ROM drive
- Sound system problems
- Optional devices
- PC Card problems
- Printer problems
- Internet Problems
- DVD operating problems–Windows 2000
- WinDVD problems
- Developing good computing habits
- Use VirtualTech
- If you need further assistance
- Other Toshiba Internet Web sites
- Toshiba’s worldwide offices
- Appendix A - Windows 98SE Supplmental Information
- Appendix B - Hot Keys
- Appendix C - Power Cable Connectors
- Appendix D - Video Modes
- Glossary
- Index
220
Troubleshooting Guide
Resolving a hardware conflict
2 Click the Hardware tab.
3 Click the Device Manager button.
4 Double-click PC Card (PCMCIA).
5 Double-click the device listed as your PC Card.
Windows displays your PC Card’s Properties dialog box. This
dialog box contains information about your PC Card
configuration and status.
The computer stops working (hangs) when you insert a PC
Card.
The problem may be caused by an I/O (input/output) conflict
between the PCMCIA socket and another device in the system.
Make sure each device has its own I/O base address.
Since all PC Cards share the same socket, each card is not required
to have its own address.
Hot swapping (removing one PC Card and inserting another
without turning the computer off) fails.
Follow this procedure before you remove a PC Card:
1 Click the PC Card icon on the taskbar.
2 Click Stop xxxx, where xxxx is the identifier for your PC
Card.
Windows 2000 displays a message saying you may safely
remove the card.
3 Remove the card from the slot.