User`s guide
Table Of Contents
- Tecra 9000 Series User’s Guide
- Contents
- Introduction
- Chapter 1 - Finding Your Way Around
- Chapter 2 - Getting Started
- Chapter 3 - Connecting Other External Devices
- Using external display devices
- Using an external keyboard
- Using a mouse
- Connecting a local printer
- Connecting an external diskette drive
- Connecting external speakers or headphones
- Connecting an external microphone
- Using an expansion device
- Adding memory
- Using Slim SelectBay® modules
- Inserting and removing hard drives
- Inserting and removing PC Cards
- Inserting an SD Media card
- Connecting your modem to a telephone line
- Using the i.Link® port
- Chapter 4 - Learning the Basics
- Computing tips
- Windows basics
- Using the keyboard
- Using the AccuPoint II
- Using the TOSHIBA Console button
- Starting a program
- Saving your work
- Printing your work
- Using a compact disc drive
- Using PC Cards
- Using SD Media cards
- Using your computer at the office
- Using a computer lock
- Caring for your computer
- Power down options
- Chapter 5 - Power Management
- Chapter 6 - Exploring Your Options
- Chapter 7 - WinDVD
- Chapter 8 - Toshiba Utilities
- Chapter 9 - Keeping Your Files Safe
- Chapter 10 - Troubleshooting Guide
- Problems that are easy to fix
- Problems when you turn on the computer
- Resolving a hardware conflict
- Using the Windows 2000 troubleshooting feature
- A plan of action
- Resolving hardware conflicts on your own
- Memory card problems
- Power and the batteries
- Keyboard problems
- AccuPoint II problems
- Display problems
- Disk drive problems
- Modem problems
- Problems with the CDROM or DVD-ROM drive
- Sound system problems
- Optional devices
- PC Card problems
- Printer problems
- Internet Problems
- DVD operating problems–Windows 2000
- WinDVD problems
- Developing good computing habits
- Use VirtualTech
- If you need further assistance
- Other Toshiba Internet Web sites
- Toshiba’s worldwide offices
- Appendix A - Windows 98SE Supplmental Information
- Appendix B - Hot Keys
- Appendix C - Power Cable Connectors
- Appendix D - Video Modes
- Glossary
- Index
100
Learning the Basics
Using a compact disc drive
The disc tray slides partially out of the drive (about 1 inch).
HINT: The drive won’t open if the computer’s power is off.
4 Grasp the tray and pull it fully open.
The drive tray fully extended
5 Hold the disc by its edges and check that it is free of dust.
If the disc is dusty, clean it as described in “Problems with
the CD-ROM or DVD-ROM drive” on page 216.
6 Place the disc carefully in the disc tray, label side up.
Positioning the disc in the drive