Instruction manual

accQcomm Interface Module
Section 2 Installation and Operation
2-2
2.2 Site Setup Begin creating a site file for the flow meter(s) connected to the
accQcomm by clicking the Site tab (Figure 2-1) and enter the
desired Site Name.
Figure 2-1 Site tab
2.2.1 LCD Display The accQcomm’s LCD can be configured to display several dif-
ferent types of information. These include: System Information
(device name, firmware, and date/time), data output for each flow
meter (flow, velocity, level, temperature, and volume, in user
selectable units), 4-20 mA outputs, and totalized flow. These dis-
plays, except for System Information, can be switched on or off,
and will cycle through all displayed parameters every 3 to 10
seconds, as set by dragging the slider bar.