DC-Cam Eng.fm Page 1 Tuesday, July 22, 2003 3:34 PM 1 About Your Camera English Front View 1 2 Back View 3 4 7 8 9 10 1. Self-timer lamp 2. Flash 3. Viewfinder 4. Lens 11 12 5. Microphone 6. Exposure sensor 7. Viewfinder 8. Operation lamp 6 5 14 13 9. Zoom Out button 10. Zoom In button Flash/Up button 11. Display button Self-timer/Left button Macro/Right button 12. Menu button 13. Set button Replay/Down button 14.
DC-Cam Eng.fm Page 2 Tuesday, July 22, 2003 3:34 PM Top View Side View 15 18 15. Shutter button 16. Mode dial 17. Power button 18. DC In terminal 19 19. USB 1.1 port 20. Video Out terminal 20 17 16 21 2 21.
DC-Cam Eng.fm Page 3 Tuesday, July 22, 2003 3:34 PM 2 Set Up the Camera 1 Open the memory card cover Open the SD (Secure Digital) memory card/MultiMediaCard cover as shown. 2 Insert the batteries Insert new batteries as shown. Do not mix old and new batteries of different types together.
DC-Cam Eng.fm Page 4 Tuesday, July 22, 2003 3:34 PM 3 Insert the memory card (optional) Insert the SD memory card/ MultiMediaCard as shown, and then close the cover. Refer to the arrow indicator on the card for insertion direction and card orientation. The SD memory card or MultiMediaCard is available separately. 4 4 Turn on the camera Press and hold down the Power button on your camera. The Operation lamp lights up and the LCD screen is activated.
DC-Cam Eng.fm Page 5 Tuesday, July 22, 2003 3:34 PM 3 Install the Drivers and Camera Installing the Drivers and Software DO NOT connect the camera to your computer yet! 1. Insert the Installation CD into your CD-ROM drive. Do not connect your camera to your computer yet. The disc supports Windows Autoplay mode and starts running automatically. If not, click Start-> Run. In the Open dialog box, type d:\install.exe (replace d:\ with the drive letter of your CD-ROM drive), and then click the OK button. 2.
DC-Cam Eng.fm Page 6 Tuesday, July 22, 2003 3:34 PM 4 Adjust the Mode Your camera has five modes that allow you to take pictures and videos, or customize settings. Select a mode by aligning the Mode dial to the mode that you want. Alignment point Auto Photo Mode This mode automatically adjusts the exposure and white balance values for your environment. Manual Photo Mode This mode allows you to manually set the exposure value, shutter speed and white balance value before taking a picture.
DC-Cam Eng.fm Page 7 Tuesday, July 22, 2003 3:34 PM 5 Take a Digital Camera Picture or Video Taking and viewing a photo 1. Disconnect your camera from your computer. 2. Set the Mode dial to Auto or Manual , and then turn the camera on. 3. Lightly press the Shutter button halfway down and look through the Viewfinder to focus on your subject. When the focus is locked, the auto focus mark turns green and the Operation lamp lights up in green. 4. Fully press down the Shutter button to take a picture.
DC-Cam Eng.fm Page 8 Tuesday, July 22, 2003 3:34 PM 6 Other Information User’s Guide For more details on using your camera, read the User’s Guide (on CD): d:\manual\English\manual.pdf Product Registration Enjoy a host of benefits by registering your product during installation, or at http://www.creative.com/register.
